PM3516 Power Modules Caterpillar


Sound Information

Usage:

3516C KEN
Note: Information of the sound level is for machines in European Union countries and in countries that adopt the directives of the European Union.


NOTICE

Hearing protection may be needed when working near an operating generator set.


Sound levels will vary depending on the configuration of the generator set and the final installation of the generator set.

Refer to the following for sound levels:

  • The sound pressure level of a complete generator set (including the radiator) at 1 meter is 92 dB(A) for the noisiest configuration when "ISO 8528-10:1998(E)" is used at 75 percent of the rated power.

  • The sound power level of a complete generator set (including the radiator) per the "European Union Directive 2000/14/EC" is 110 dB(A) for the noisiest configuration when used at 75 percent of the rated power.

Note: The preceding sound levels are emission levels. The preceding sound levels are not necessarily safe sound levels. There is a correlation between the emission levels and the level of exposure. The correlation between emission levels and the level of exposure can not be used to determine if further precautions are required.

Refer to the following for factors that influence the level of exposure:

  • The characteristics of the area around the generator set

  • Other sources of noise

  • The number of machines and other adjacent processes

  • The length of time of exposure to the noise

This information will enable the user of the machine to evaluate the hazard and the risk.

Caterpillar Information System:

793F Off-Highway Truck Machine Systems Transmission Control - Remove and Install
797F and 797F XQ Off-Highway Truck/Tractor Braking System Gear Motor (Rear Axle Oil Cooler Fan)
C13 Industrial Engines Engine Oil Filter Base
2009/12/03 Gasket for the Turbocharger and Exhaust Manifold for 3056, 3056E and C6.6 Engines {1052, 7555}
2009/10/23 Improved Assembly for the Alternator Bracket on 3054C, 3054E and C4.4Engines {1405}
C7.1 Industrial Engine and Generator Set Motorized Valve - Test
3516C HD Generator Set with Gearbox Declaration of Conformity
3512C HD SR500 Generator Sets Sound Information
3508B, 3512B, and 3516B High Displacement Generator Sets Stator Winding Temperature - Test
CX31-P600 Petroleum Transmission Torque Converter
770 and 772 Off-Highway Truck Parking
C175-16 Marine Engines Fuel System Primary Filter - Clean/Inspect/Replace
PM3516 Power Modules Declaration of Conformity
PM3516 Power Modules Generator Set Installation
C7.1 Industrial Engine and Generator Set Diesel Particulate Filter Identification Signal - Test
349F and 352F Excavators Machine System Specifications Rollover Protective Structure (ROPS) Mounting
Troubleshooting Cycling of the Engine Cooling Fan{1353, 1356, 1359, 1901, 5061} Troubleshooting Cycling of the Engine Cooling Fan{1353, 1356, 1359, 1901, 5061}
349F and 352F Excavators Rollover Protective Structure (ROPS) - Inspect
CX31-P600 Petroleum Transmission General Information
C13 and C15 On-highway Engines ARD Nozzle Heater - Test
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Fuel Related Components in Cold Weather
Bench Test Procedure for a 797F Off-Highway Truck Transmission {3030, 3073, 3139} Bench Test Procedure for a 797F Off-Highway Truck Transmission {3030, 3073, 3139}
2009/10/20 A New Version of Caterpillar Electronic Technician (ET) Better Supports G3400 and G3500 Engines {0599, 1901}
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Radiator Restrictions
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.