G3512E Generator Set Engine Caterpillar


Component Location

Usage:

G3512E NGS


Illustration 1g01981693
(1) Differential pressure sensor for the throttle valve
(2) Pressure sensor for turbocharger compressor outlet
(3) Temperature sensor for turbocharger compressor outlet
(4) Pressure sensor for the coolant outlet
(5) Emergency stop button
(6) Air inlet pressure sensor
(7) Oil temperature sensor
(8) Pressure switch for the coolant pump (inlet)
(9) Timing calibration connector
(10) Pressure sensor for unfiltered oil
(11) Pressure sensor for filtered oil


Illustration 2g01980775
(12) Actuator for the compressor bypass valve
(13) Fuel metering valve
(14) Throttle actuator
(15) Coolant temperature sensor
(16) Inlet manifold air temperature sensor
(17) Engine speed/timing sensor
(18) Detonation sensor
(19) Power distribution box


Illustration 3g01985215
(20) Thermocouple for the turbocharger outlet
(21) Thermocouple for the temperature of the left cylinder bank
(22) Thermocouple for the temperature of the right cylinder bank
(23) Thermocouples for the outlets of the cylinders

Caterpillar Information System:

C6.6 Industrial Engine Engine Valve Lash - Inspect
3508C, 3512C and 3516C Locomotive Engines Turbocharger
3508C, 3512C and 3516C Locomotive Engines Exhaust Shield
3508C, 3512C and 3516C Locomotive Engines Exhaust Manifold
G3512E Generator Set Engine Electrical Connectors
3516B Engine for 994F and 994H Wheel Loaders Electronic Service Tool Does Not Communicate
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Battery Disconnect Switch - If Equipped
2009/08/03 The Connector for the Chassis Harness and the Platform Harness Should Be Tightened to the Specified Torque on Certain Excavators {1408}
2009/08/03 A New Bolt Is Used on the Valve Mechanism Gp of All 3500 Machine Engines {1102, 1107, 1120, 1121, 1123, 1209}
C18 Industrial Engine Aftercooler - Test
C13 Industrial Engines Turbocharger
793F and 797F Off-Highway Trucks Chassis Electronic Control System Glossary of Electrical Terms
G3304B and G3306B Engines Cylinder Head - Remove
C13 Industrial Engines Turbocharger
3508C, 3512C, and 3516C Locomotive Engines Protection Override - Test
Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310} Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310}
797F and 797F XQ Off-Highway Truck Braking System Solenoid Valve (Brake Cooling)
797F and 797F XQ Off-Highway Truck Braking System Solenoid Valve (Rear Axle Motor Unloader)
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines - Stick Lowering Control
3508C, 3512C and 3516C Locomotive Engines Turbocharger Oil Lines
2009/08/24 New Fuel Injection Lines {1251, 1252}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Lines
3500 Engines Thermocouple
3508C, 3512C, and 3516C Locomotive Engines Injector Solenoid - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.