3508C, 3512C and 3516C Locomotive Engines Caterpillar


Exhaust Manifold

Usage:

3508C F1X


Illustration 1g02315475
Top view


Illustration 2g02315474
Rear view

Table 1
Specification for 326-2872 Exhaust Manifold Gp 
Item  Qty  Part  Specification description 
48  7L-6443 High Temperature Bolt  Before assembly, apply Loctite C5A Copper anti-seize to the threads and the face of the washers. 
Tighten diagonally opposite bolts simultaneously to 55 ± 5 N·m (41 ± 4 lb ft).
1W-4658 Clamp  Before assembly, apply Loctite C5A Copper anti-seize to the threads , the bearing surfaces, and the inside diameter of the clamps. 
Torque to 7.5 ± 1.0 N·m (66.4 ± 8.9 lb in).
32  9L-7373 High Temperature Bolt  Before assembly, apply Loctite C5A Copper anti-seize to the threads and the face of the washers. 
Tighten diagonally opposite bolts simultaneously to 55 ± 5 N·m (41 ± 4 lb ft).

Caterpillar Information System:

G3512E Generator Set Engine Electrical Connectors
3516B Engine for 994F and 994H Wheel Loaders Electronic Service Tool Does Not Communicate
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Battery Disconnect Switch - If Equipped
2009/08/03 The Connector for the Chassis Harness and the Platform Harness Should Be Tightened to the Specified Torque on Certain Excavators {1408}
2009/08/03 A New Bolt Is Used on the Valve Mechanism Gp of All 3500 Machine Engines {1102, 1107, 1120, 1121, 1123, 1209}
C18 Industrial Engine Aftercooler - Test
C13 Industrial Engines Turbocharger
793F and 797F Off-Highway Trucks Chassis Electronic Control System Glossary of Electrical Terms
2009/08/10 Diagnostic Publications for the Systems of the Hydraulic Electronic Unit Injector (HEUI) have been Updated {1100, 1126, 1250, 1251, 1261, 1290}
2009/08/01 Diagnostic Publications for the Systems of the Hydraulic Electronic Unit Injector (HEUI) have been Updated {1100, 1126, 1250, 1251, 1261, 1290}
2009/08/17 New Metal Shipping Stands for 3500 Machine Engines {1000}
2009/08/31 Diagnostic Process for Fuel Rail Pressure Sensor {127A, 1439}
3508C, 3512C and 3516C Locomotive Engines Exhaust Shield
3508C, 3512C and 3516C Locomotive Engines Turbocharger
C6.6 Industrial Engine Engine Valve Lash - Inspect
G3512E Generator Set Engine Component Location
G3304B and G3306B Engines Cylinder Head - Remove
C13 Industrial Engines Turbocharger
3508C, 3512C, and 3516C Locomotive Engines Protection Override - Test
Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310} Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310}
797F and 797F XQ Off-Highway Truck Braking System Solenoid Valve (Brake Cooling)
797F and 797F XQ Off-Highway Truck Braking System Solenoid Valve (Rear Axle Motor Unloader)
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines - Stick Lowering Control
3508C, 3512C and 3516C Locomotive Engines Turbocharger Oil Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.