Air Inlet and Exhaust Lines
Show/hide table
Illustration 1 | g02837396 |
Right side view |
Show/hide table
Illustration 2 | g02837399 |
Bolt tightening sequence |
Show/hide table
Specification for 326-2873 Air Lines Gp | |||
Item | Qty | Part | Specification description |
1 | 6 | 5F-4899 Bolt | Use the following procedure in order to assemble the aftercooler assembly and tighten the bolts:
1. Assemble the seals to the aftercooler core. 2. Temporarily secure the bottom seal to the aftercooler with tape. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal. 3. Assemble the aftercooler with seals to the inlet manifold. 4. Inspect the bottom seal in order to ensure that the seal is seating correctly in the recess. 5. Install the aftercooler cover. 6. Inspect the upper seal in order to ensure that the seal is seating correctly in the recess. 7. Install the cover bolts. Hand tighten the cover bolts. 8. Tighten the bolts in a numerical sequence as shown in Illustration 2 to 9. Again, tighten the bolts in a numerical sequence that is shown in Illustration 2 to 10. Remove the tape. |
2 | 6 | 322-4643 Bolt | |
3 | 4 | 6V-3917 O-Ring Seal | Lubricate the bore lightly with glycerin or 5P-3975 Rubber Lubricant. |
4 | 8 | 6V-5101 O-Ring Seal | Lubricate the bore lightly with glycerin or 5P-3975 Rubber Lubricant. |
Show/hide table
Illustration 3 | g02837397 |
Top view |
Show/hide table
Specification for 326-2873 Air Lines Gp | |||
Item | Qty | Part | Specification description |
5 | 4 | 6V-5103 O-Ring Seal | Lubricate the bore lightly with glycerin or 5P-3975 Rubber Lubricant. |
Caterpillar Information System:
2009/08/03 Radiator {1353, 1356, 1395}
C-10, C-12 and C-15 On-Highway Engines Refill Capacities and Recommendations
3406E, C-10, C-12, C-15, C-16 Truck Engines Refill Capacities and Recommendations
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 3396 - FMI 04
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 3395 - FMI 04
Installing the New Air Compressor Groups on Some On-Highway Engines{1803} Installing the New Air Compressor Groups on Some On-Highway Engines{1803}
2009/08/03 A New Support Assembly Is Now Available {0635, 4459}
793F Off-Highway Truck Engine Supplement Guard (Engine Oil Pan) - Remove and Install
3406E, C-10 and C-12 Truck Engines Refill Capacities and Recommendations
3508C, 3512C and 3516C Locomotive Engines Air Inlet and Exhaust Lines
3508C, 3512C and 3516C Locomotive Engines Camshaft
C18 Industrial Engine Relay - Test
3508C, 3512C and 3516C Locomotive Engines Water Lines
C4.4 Industrial Engine Cooling System Coolant Extender (ELC) - Add
C4.4 Industrial Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
2009/10/01 Improved Exhaust Components and Heat Shields Are Used on Some G3520C Engines {1059, 1067}
797F and 797F XQ Off-Highway Truck Steering System Oil Filter (Hydraulic Fan, Steering Pump Case Drain)
793F Off-Highway Truck Engine Supplement Damper - Remove and Install
793F Off-Highway Truck Engine Supplement Turbocharger - Remove and Install
3508C, 3512C and 3516C Locomotive Engines Water Lines
C7.1 Industrial Engine and Generator Set Mode Selection Circuit - Test
3508C, 3512C and 3516C Locomotive Engines Water Lines
C7.1 Industrial Engine and Generator Set Customer Specified Parameters Table
C7.1 Industrial Engine and Generator Set Customer Specified Parameters Worksheet