2010/01/18 Caterpillar


New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}

Usage:

793B 1HL
Caterpillar Products: Machine Engines
  • All 3500 Series
  • Description of Change: The new O-Ring has an increased sealing capability. This change increases the service life of the seal.

    Adaptable To: The new 259-4598 O-Ring Seal is a direct replacement for the 235-3548 O-Ring Seal. The new O-Ring is adaptable back to first production on all 3500 Engines.




    Illustration 1g01953423

    Front housing

    (1) 259-4598 O-Ring Seal bores

    Note: The bores for the new 259-4598 O-Ring Seal must be lubricated with 207-1601 Rubber Lubricant. Refer to Illustration 1 for the locations of the bores that must be lubricated.

    Note: The seals for the idler shaft have not changed.This change is effective for engines with serial numbers that were built after 6January 2010.

    Caterpillar Information System:

    Calculations for Required Inlet Pressure and Back Pressure of the Fuel on C175 Engines that are Utilizing a Day Tank or Standby Application{1250} Calculations for Required Inlet Pressure and Back Pressure of the Fuel on C175 Engines that are Utilizing a Day Tank or Standby Application{1250}
    797F and 797F XQ Off-Highway Truck Braking System Slack Adjuster (Front Brakes)
    793F AC Off-Highway Truck Hydraulic and Braking System Solenoid Valve (Brake Pump Unloader)
    793F AC Off-Highway Truck Hydraulic and Braking System Relief Valve (Main)
    C15 and C18 Engines for Caterpillar Built Machines Flywheel - Remove and Install
    G3304B and G3306B Engines Valve Mechanism Cover - Remove and Install
    C9.3 Engines for Caterpillar Built Machines Soot Antenna - Remove and Install
    G3304B and G3306B Engines Gear Group (Front) - Install
    797F and 797F XQ Off-Highway Truck Power Train Planetary Case and Parts Group - Front Module
    C7.1 Industrial Engine and Generator Set Mode Switch Setup
    G3304B and G3306B Engines Gear Group (Front) - Remove
    14L Motor Grader Water Pump - Remove and Install
    G3304B and G3306B Engines Rocker Shaft and Push Rod - Remove
    793F and 793F CMD Off-Highway Truck Braking System Slack Adjuster (Rear Brakes)
    G3304B and G3306B Engines Rocker Shaft and Push Rod - Install
    793F AC Off-Highway Truck Hydraulic and Braking System Check Valve (Service Brake Accumulator)
    793F AC Off-Highway Truck Hydraulic and Braking System Check Valve (Parking Brake Accumulator)
    C13, C15, and C18 Tier 4 Interim Engines ARD Temperature Is Low
    793F AC Off-Highway Truck Hydraulic and Braking System Check Valve (Parking Brake Release)
    966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Check Valve (Brake Accumulator)
    793F and 797F Off-Highway Trucks Chassis Electronic Control System MID 087 - CID 0144 - FMI 05
    793F and 797F Off-Highway Trucks Chassis Electronic Control System MID 087 - CID 0144 - FMI 03
    793F and 797F Off-Highway Trucks Chassis Electronic Control System MID 087 - CID 0144 - FMI 06
    C7.1 Industrial Engine and Generator Set System Configuration Parameters
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.