G3304B and G3306B Engines Caterpillar


Water Temperature Regulator - Remove

Usage:

G3304B A4E

拆卸步骤

------ WARNING! ------

热的冷却液、蒸汽和碱会造成人身伤害。

在工作温度下,发动机冷却液是热的而且处在压力下。 散热器和所有到加热器的管路或发动机中都有热的冷却液或蒸汽。 与它们的任何接触都会造成严重烫伤。

只有当发动机停机且冷却系统压力盖已经冷却到可以徒手触摸时,再慢慢拆下冷却系统压力盖以释放压力。

不要试图在冷却液还热的时候去拧紧软管接头,软管会脱落而造成灼伤。

警告:冷却系统的冷却液添加剂含碱。 应避免它与皮肤和眼睛接触。



注意

在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。

按照本地法规和条例处置所有液体。



注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。


  1. 将冷却系统中的冷却液抽到水温调节器液位以下。 请参阅操作和保养手册, "冷却系统冷却液 - 更换"。



    图 1g01931472

  1. 将螺栓 (1) 和管组件 (2) 从水温调节器壳体 (7) 上拆下。 取下 O 形密封圈。

  1. 松开卡箍 (4) 并将软管 (3) 从管 (6) 上断开。

  1. 将螺栓 (5) 、管 (6) 和密封垫从水温调节器壳体 (7) 上拆下。

  1. 拆下水温调节器。

  1. 拆下水温调节器壳体 (7) 和密封垫。

Caterpillar Information System:

3500B Generator Set Engines Vibration Damper Guard
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 1401 - FMI 06
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 1401 - FMI 05
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 1401 - FMI 03
G3304B and G3306B Engines Turbocharger - Assemble
G3304B and G3306B Engines Turbocharger - Disassemble
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Diagnostic Code List
C9.3 Tier 4 Final Engines Exhaust Gas Valve (NRS)
3508C, 3512C, and 3516C Locomotive Engines CAN Data Link - Test
G3304B and G3306B Engines CAN Data Link - Test
3406E, C-10, C-12, C-15, C-16 Truck Engines Crankshaft End Play - Test
G3304B and G3306B Engines Turbocharger - Install
G3304B and G3306B Engines Water Temperature Regulator - Install
3508C, 3512C, and 3516C Locomotive Engines Cat Data Link - Test
C9.3 Tier 4 Final Engines General Information
3512C and 3516C Marine Auxiliary and Generator Set Engines Mounting and Dismounting
G3304B and G3306B Engines Water Pump - Remove
2009/06/01 Make Sure that the Generator Set Is Stored Properly {1021, 1404, 7002}
C9.3 Tier 4 Final Engines Basic Engine
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 1402 - FMI 03
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 1402 - FMI 05
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 1402 - FMI 06
C9.3 Marine Auxiliary Engines Walk-Around Inspection
G3304B and G3306B Engines Water Pump - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.