Turbocharger - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 5P-3931     | 防粘结剂     | -     |
- 将清洁的发动机机油涂抹在一个新 O 形密封圈上。 将一个新的 O 形密封圈安装在排油管 (8) 上。
Show/hide table
图 1 | g01929141 |
- 将排油管 (8) 安装在飞轮壳体上。
- 将适当起吊设备连在涡轮增压器 (1) 上。 涡轮增压器 (1) 的重量约为 25 kg (55 lb)。
- 将一个新密封垫在排气歧管上放置到位。
- 将工具 (A) 涂抹在固定涡轮增压器的螺柱的螺纹上。
- 将涡轮增压器 (1) 在排气歧管上放置到位。 安装螺母 (4) 。 拧紧螺母至扭矩为 54 ± 5 N·m (40 ± 4 lb ft)。
- 安装新密封垫、管组件 (7) 、管组件 (3) 和螺栓。
- 安装一个新的 O 形密封圈、排油管 (8) 和螺栓。
- 安装一个新的 O 形密封圈、供油管 (2) 和螺栓。
- 将工具 (A) 涂覆在新密封圈上和连接器 (9) 的槽中。
- 将新密封圈安装在连接器 (9) 的槽中。
- 将连接器 (9) 和支架在涡轮增压器的壳体上放置到位。 安装将支架固定在排气歧管上的螺栓和螺母。
- 将排气弯管 (5) 和卡箍 (6) 安装在支架上。 拧紧卡箍螺母至扭矩为 14 N·m (125 lb in)。
- 安装空气滤清器。
End By: 安装增压控制阀。
Caterpillar Information System:
G3304B and G3306B Engines Turbocharger - Remove
C13 Engine for Combat and Tactical Vehicles Electronic Control Wiring Group
G3304B and G3306B Engines Aftercooler - Install
C13 Engine for Combat and Tactical Vehicles Electronic Control Module
793F and 793F CMD Off-Highway Truck Power Train Position Sensor (Hoist Control)
G3304B and G3306B Engines Aftercooler - Remove
2009/05/25 Correction to Schematics for the Control Group {1408}
Instructions For Converting Uninterruptible Power Supplys With Hall Effect Probes To The G3.5 Load Cell{4480} Instructions For Converting Uninterruptible Power Supplys With Hall Effect Probes To The G3.5 Load Cell{4480}
UPS Bearing Type I to G3.5 Conversion{4480} UPS Bearing Type I to G3.5 Conversion{4480}
C13 Engine for Combat and Tactical Vehicles Belt Tensioner
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install - Return
3500B Engines Air Shutoff
3406E, C-10, C-12, C-15, C-16 Truck Engines Crankshaft End Play - Test
G3304B and G3306B Engines CAN Data Link - Test
3508C, 3512C, and 3516C Locomotive Engines CAN Data Link - Test
C9.3 Tier 4 Final Engines Exhaust Gas Valve (NRS)
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Diagnostic Code List
G3304B and G3306B Engines Turbocharger - Disassemble
G3304B and G3306B Engines Turbocharger - Assemble
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 1401 - FMI 03
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 1401 - FMI 05
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 1401 - FMI 06
3500B Generator Set Engines Vibration Damper Guard
G3304B and G3306B Engines Water Temperature Regulator - Remove