Aftercooler - Install
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 将一薄层清洁的发动机机油涂覆到所有 O 形密封圈和所有适配器的孔上。
- 将新密封垫和后冷器壳体 (10) 放置到位。 安装螺栓 (11) 和螺栓 (7) 。
Show/hide table
 | |
| 图 1 | g01928476 |
- 安装密封垫和后冷器芯。
- 安装密封垫、后冷器盖 (9) 和螺栓 (8) 。
- 将进气歧管温度传感器 (6) 安装在后冷器 (1) 上。 连接线束组件。
Show/hide table
 | |
| 图 2 | g01928375 |
- 将一个新的密封垫、O 形密封圈和适配器安装到后冷器 (1) 上。
- 将弯管组件 (5) 连接到后冷器 (1) 上。
- 安装螺栓 (4) 。
- 将一个新的密封垫、O 形密封圈和适配器和管组件 (2) 安装到后冷器 (1) 上。
Show/hide table
 | |
| 图 3 | g01928374 |
- 安装螺栓 (3) 。
End By:
- 安装空燃混合器。
- 安装气体压力调节器。
Caterpillar Information System:
C13 Engine for Combat and Tactical Vehicles Electronic Control Module
793F and 793F CMD Off-Highway Truck Power Train Position Sensor (Hoist Control)
G3304B and G3306B Engines Aftercooler - Remove
2009/05/25 Correction to Schematics for the Control Group {1408}
Instructions For Converting Uninterruptible Power Supplys With Hall Effect Probes To The G3.5 Load Cell{4480} Instructions For Converting Uninterruptible Power Supplys With Hall Effect Probes To The G3.5 Load Cell{4480}
UPS Bearing Type I to G3.5 Conversion{4480} UPS Bearing Type I to G3.5 Conversion{4480}
C13 Engine for Combat and Tactical Vehicles Belt Tensioner
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install - Return
3500B Engines Air Shutoff
3500 Engines Exhaust Manifold
2009/07/13 Improved Diagnostic Procedures Are Now Used to Determine Proper Belt Alignment on C9 Marine Engines {1358, 1397}
C9.3 Industrial Engine Turbocharger
C13 Engine for Combat and Tactical Vehicles Electronic Control Wiring Group
G3304B and G3306B Engines Turbocharger - Remove
G3304B and G3306B Engines Turbocharger - Install
3406E, C-10, C-12, C-15, C-16 Truck Engines Crankshaft End Play - Test
G3304B and G3306B Engines CAN Data Link - Test
3508C, 3512C, and 3516C Locomotive Engines CAN Data Link - Test
C9.3 Tier 4 Final Engines Exhaust Gas Valve (NRS)
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Diagnostic Code List
G3304B and G3306B Engines Turbocharger - Disassemble
G3304B and G3306B Engines Turbocharger - Assemble
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 1401 - FMI 03
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 1401 - FMI 05