C13 Engine for Combat and Tactical Vehicles Caterpillar

Belt Tensioner

Usage:

C13 EMS

Show/hide table




Illustration 1	g02805297

(1) Tighten the bolts to the following torque. ... 50 ± 5 N·m (37 ± 4 lb ft)

(2) Mounting bracket

(3) The tensioner is in the free position when the belt is not on the tensioner. Required torque for rotating the tensioner to a 30 degree angle from the free position ... 62.1 ± 6.2 N·m (46 ± 5 lb ft)

() The tensioner is in the free position when the belt is not on the tensioner. Required torque for rotating the tensioner to a 30 degree angle from the free position ... 58.8 ± 5.9 N·m (43 ± 4 lb ft)

Caterpillar Information System:

C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install - Return

3500B Engines Air Shutoff

3500 Engines Exhaust Manifold

2009/07/13 Improved Diagnostic Procedures Are Now Used to Determine Proper Belt Alignment on C9 Marine Engines {1358, 1397}

C9.3 Industrial Engine Turbocharger

797F and 797F XQ Off-Highway Trucks Machine Systems Hoist Cylinder - Remove and Install

The Loss of Fuel Prime in Some C32 Engines{1250, 1280} The Loss of Fuel Prime in Some C32 Engines{1250, 1280}

797 Off-Highway Truck Front Suspension (Cylinder) - Assemble

797 Off-Highway Truck Front Suspension (Cylinder) - Disassemble

C9 Marine Engines Configuration Parameters

C9 Marine Engines Diagnostic Flash Code Retrieval

3000 Frame SR5 Electric Power Generation Diode Assembly - Remove and Install

UPS Bearing Type I to G3.5 Conversion{4480} UPS Bearing Type I to G3.5 Conversion{4480}

Instructions For Converting Uninterruptible Power Supplys With Hall Effect Probes To The G3.5 Load Cell{4480} Instructions For Converting Uninterruptible Power Supplys With Hall Effect Probes To The G3.5 Load Cell{4480}

2009/05/25 Correction to Schematics for the Control Group {1408}

G3304B and G3306B Engines Aftercooler - Remove

793F and 793F CMD Off-Highway Truck Power Train Position Sensor (Hoist Control)

C13 Engine for Combat and Tactical Vehicles Electronic Control Module

G3304B and G3306B Engines Aftercooler - Install

C13 Engine for Combat and Tactical Vehicles Electronic Control Wiring Group

G3304B and G3306B Engines Turbocharger - Remove

G3304B and G3306B Engines Turbocharger - Install

3406E, C-10, C-12, C-15, C-16 Truck Engines Crankshaft End Play - Test

G3304B and G3306B Engines CAN Data Link - Test