3500B Engines Caterpillar


Air Shutoff

Usage:

3508B 7SM


图 1g02596659
后视图


图 2g02596660

表 1
技术规格 - 214-5543 空气切断阀总成 
项目  数量  零件  技术规格说明 
272-7094 空气切断阀总成  阀的最大工作温度为 204 °C (399 °F)。 
阀的最大工作压力为 300 kPa (44 psi)
227-7483 限制开关组件  拧紧至扭矩为 16.3 N·m (12.0 lb ft)。 
在将限制开关组件 (2) 组装到切断阀前,在螺塞螺纹上涂敷 4C-5599 防咬合剂。
215-2589 螺栓  拧紧至扭矩为 7 ± 1 N·m (62 ± 9 lb in)。 
4C-5599 防咬合剂涂敷到螺栓 (3) 和螺栓 (7) 的螺纹上。
215-2706 空气切断阀组件  在空气切断阀组件的轴上涂抹 4C-5599 防咬合剂。 
装配前,在车身 (5) 和盖 (6) 之间涂抹 4C-9614 硅密封剂。 
215-2587 螺栓  拧紧至扭矩为 9.5 ± 1.5 N·m (84.1 ± 13.3 lb in)。 
230-4073 电磁阀组件  工作电压为 18 至 32 VDC。 
25 °C (77 °F) 下的电阻为 1.485 至 1.815 欧姆。
将螺栓 (8) 拧紧至 9.5 ± 1.5 N·m (84.1 ± 13.3 lb in)

Caterpillar Information System:

3500 Engines Exhaust Manifold
2009/07/13 Improved Diagnostic Procedures Are Now Used to Determine Proper Belt Alignment on C9 Marine Engines {1358, 1397}
C9.3 Industrial Engine Turbocharger
797F and 797F XQ Off-Highway Trucks Machine Systems Hoist Cylinder - Remove and Install
The Loss of Fuel Prime in Some C32 Engines{1250, 1280} The Loss of Fuel Prime in Some C32 Engines{1250, 1280}
797 Off-Highway Truck Front Suspension (Cylinder) - Assemble
797 Off-Highway Truck Front Suspension (Cylinder) - Disassemble
C9 Marine Engines Configuration Parameters
C9 Marine Engines Diagnostic Flash Code Retrieval
3000 Frame SR5 Electric Power Generation Diode Assembly - Remove and Install
3000 Frame SR5 Electric Power Generation Coupling - Install
C9.3 Industrial Engine Turbocharger
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install - Return
C13 Engine for Combat and Tactical Vehicles Belt Tensioner
UPS Bearing Type I to G3.5 Conversion{4480} UPS Bearing Type I to G3.5 Conversion{4480}
Instructions For Converting Uninterruptible Power Supplys With Hall Effect Probes To The G3.5 Load Cell{4480} Instructions For Converting Uninterruptible Power Supplys With Hall Effect Probes To The G3.5 Load Cell{4480}
2009/05/25 Correction to Schematics for the Control Group {1408}
G3304B and G3306B Engines Aftercooler - Remove
793F and 793F CMD Off-Highway Truck Power Train Position Sensor (Hoist Control)
C13 Engine for Combat and Tactical Vehicles Electronic Control Module
G3304B and G3306B Engines Aftercooler - Install
C13 Engine for Combat and Tactical Vehicles Electronic Control Wiring Group
G3304B and G3306B Engines Turbocharger - Remove
G3304B and G3306B Engines Turbocharger - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.