Turbocharger
Show/hide table
Illustration 1 | g01926780 |
Note: Before assembly, lubricate the threads and the washer face of the taperlock studs with 4C-5599 Anti-Seize Compound. Assemble the taperlock studs so that the letter "X" is showing.
(1) Torque for four locknuts ...
(2) Torque for two clamps ...
Caterpillar Information System:
797F and 797F XQ Off-Highway Trucks Machine Systems Hoist Cylinder - Remove and Install
The Loss of Fuel Prime in Some C32 Engines{1250, 1280} The Loss of Fuel Prime in Some C32 Engines{1250, 1280}
797 Off-Highway Truck Front Suspension (Cylinder) - Assemble
797 Off-Highway Truck Front Suspension (Cylinder) - Disassemble
C9 Marine Engines Configuration Parameters
C9 Marine Engines Diagnostic Flash Code Retrieval
3000 Frame SR5 Electric Power Generation Diode Assembly - Remove and Install
3000 Frame SR5 Electric Power Generation Coupling - Install
C9.3 Industrial Engine Turbocharger
3000 Frame SR5 Electric Power Generation Coupling - Remove
C32 Petroleum Engines General Hazard Information
3512B and 3516B Engines Exhaust Manifold
2009/07/13 Improved Diagnostic Procedures Are Now Used to Determine Proper Belt Alignment on C9 Marine Engines {1358, 1397}
3500 Engines Exhaust Manifold
3500B Engines Air Shutoff
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install - Return
C13 Engine for Combat and Tactical Vehicles Belt Tensioner
UPS Bearing Type I to G3.5 Conversion{4480} UPS Bearing Type I to G3.5 Conversion{4480}
Instructions For Converting Uninterruptible Power Supplys With Hall Effect Probes To The G3.5 Load Cell{4480} Instructions For Converting Uninterruptible Power Supplys With Hall Effect Probes To The G3.5 Load Cell{4480}
2009/05/25 Correction to Schematics for the Control Group {1408}
G3304B and G3306B Engines Aftercooler - Remove
793F and 793F CMD Off-Highway Truck Power Train Position Sensor (Hoist Control)
C13 Engine for Combat and Tactical Vehicles Electronic Control Module
G3304B and G3306B Engines Aftercooler - Install