Carburetor - Install
安装步骤
- 将一个新的密封垫安装在空燃混合器 (3) 上。 将空燃混合器 (3) 放置到位。
Show/hide table
图 1 | g02453163 |
- 安装螺栓 (1) 。
- 将卡箍 (2) 安装在接头组件上。
- 将软管滑入空燃混合器 (3) 上的位置。 拧紧卡箍 (4) 。
- 将线束组件连接到空燃混合器 (3) 上。
- 打开通向气体压力调节器的供油管路。
Caterpillar Information System:
C32 Petroleum Engines Installation Environment
C7 Petroleum Engine Installation Environment
C13 Engine for Caterpillar Built Machines Belt Tensioner - Remove and Install
G3304B and G3306B Engines Indicator Lamp - Test
C7.1 Industrial Engine and Generator Set 5 Volt Sensor Supply Circuit - Test
C18 Marine Generator Set Model View Illustrations
3516B Engine for 994F and 994H Wheel Loaders Power Is Intermittently Low or Power Cutout Is Intermittent
2009/06/01 A Hotline for the Fuel Systems for Hydraulic Electronic Unit Injectors (HEUI) Is Now Available. {1251, 1290}
2009/06/08 A Hotline for the Fuel Systems for Hydraulic Electronic Unit Injectors (HEUI) Is Now Available. {1251, 1290}
C11, C13 and C15 On-highway Engines 0173-00 High Exhaust Gas Temperature Derate
Failures of Cylinder Heads with the Intake Valves and Exhaust Valves in the Incorrect Positions{1100, 1105} Failures of Cylinder Heads with the Intake Valves and Exhaust Valves in the Incorrect Positions{1100, 1105}
Procedure to Rerate the Engine with Caterpillar Electronic Technician (ET) {1901, 1902, 1920} Procedure to Rerate the Engine with Caterpillar Electronic Technician (ET) {1901, 1902, 1920}
C7 Petroleum Engine Plate Locations and Film Locations
G3304B and G3306B Engines Spark Plugs - Remove and Install
G3304B and G3306B Engines Spark Plug Adapter - Remove and Install
C13 Engine for Caterpillar Built Machines Accessory Drive - Remove and Install - Brackets and Pulleys
C9 Engine Monitoring System
C32 Petroleum Engines Monitoring System
G3304B and G3306B Engines Exhaust Manifold - Remove
C7 Engines for Combat and Tactical Vehicles Safety Messages
2009/06/22 Fuel Injection Pump Latch Valve {1251}
3500B Engines for Caterpillar Built Power Modules Fuel Injector Mechanism
C9.3 Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
2009/06/08 The Packaging Consist of the C9 Genset Has Been Changed {1000, 1021, 7002}