Flywheel - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Link Bracket | 2 |
B | FT2712 | Guide Stud | 2 |
- Install Tooling (A) on flywheel (2). Fasten a suitable lifting device to flywheel (2). The weight of the flywheel is approximately
41 kg (90 lb) . - Remove two bolts (1) that are 180 degrees from the first bolt. Install Tooling (B).
- Remove the remaining six bolts (1).
- Remove flywheel (2).
- Inspect the flywheel ring gear. Replace the ring gear, if necessary. Place the flywheel on a wood block. Use a hammer and a punch in order to remove the ring gear.
Show/hide table
Illustration 1 | g01010803 |
Caterpillar Information System:
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562} Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
C13 Engine Water Temperature Regulator - Remove and Install
C13 Engine Water Pump - Install
C13 Engine Water Pump - Remove
3512C Engine for 785D Off-Highway Truck/Tractors Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
C13 Engine Engine Oil Pump - Install
C13 Engine Engine Oil Pump - Assemble
C13 Engine Engine Oil Pump - Disassemble
C13 Engine Engine Oil Pump - Remove
C13 Engine Engine Oil Cooler - Install
C13 Engine Engine Oil Cooler - Remove
C13 Engine Flywheel - Install
C13 Engine Flywheel Housing - Remove and Install
C13 Engine Rear Power Take-Off (RPTO) - Remove
C7 On-highway Engine Diesel Particulate Filter
C13 Engine Rear Power Take-Off (RPTO) - Install
C13 Engine Crankshaft Front Seal - Remove
C13 Engine Crankshaft Front Seal - Install
C13 Engine Front Cover - Remove
C13 Engine Front Cover - Install
C13 Engine Gear Group (Front) - Remove
C15 and C18 Industrial Engines Combustion Head - Remove and Install
C13 Engine Gear Group (Front) - Install