Water Pump - Remove
- Drain the coolant from the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
- Remove the fan drive belt.
- Disconnect the lower radiator hose from the water pump.
Show/hide table
Illustration 1 g01009921 - Disconnect hose assembly (1).
- Remove bolts (2).
- Raise housing (3) in order to disconnect tube assembly (4).
Show/hide table
Illustration 2 g01009922 - Remove bolt (6) and pulley (5).
Show/hide table
Illustration 3 g01010397 - Remove brackets (7) and bracket (8).
- Disconnect tube assembly (4).
Show/hide table
Illustration 4 g01010398 - Remove bolts (11).
- Loosen clamps (9).
- Remove adapter (10).
Show/hide table
Illustration 5 g01010400 - Remove inlet housing (12).
Show/hide table
Illustration 6 g01010401 - Remove bolts (13).
- Remove water pump (14).
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Caterpillar Information System:
3512C Engine for 785D Off-Highway Truck/Tractors Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
C13 Engine Engine Oil Pump - Install
C13 Engine Engine Oil Pump - Assemble
C13 Engine Engine Oil Pump - Disassemble
C13 Engine Engine Oil Pump - Remove
C13 Engine Engine Oil Cooler - Install
C13 Engine Engine Oil Cooler - Remove
C13 Engine Engine Oil Filter Base - Install
C13 Engine Engine Oil Filter Base - Assemble
C13 Engine Engine Oil Filter Base - Disassemble
C13 Engine Engine Oil Filter Base - Remove
C13 Engine Water Pump - Install
C13 Engine Water Temperature Regulator - Remove and Install
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562} Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
C13 Engine Flywheel - Remove
C13 Engine Flywheel - Install
C13 Engine Flywheel Housing - Remove and Install
C13 Engine Rear Power Take-Off (RPTO) - Remove
C7 On-highway Engine Diesel Particulate Filter
C13 Engine Rear Power Take-Off (RPTO) - Install
C13 Engine Crankshaft Front Seal - Remove
C13 Engine Crankshaft Front Seal - Install
C13 Engine Front Cover - Remove