Engine Oil Pump - Assemble
- Install shaft assembly (5) and shaft assembly (8) into engine oil pump (4).
- Install oil seal (6).
- Install cover (2) onto engine oil pump (4).
- Install bolts (3).
- Raise the temperature of gear (7).
- Install gear (7). Dimension (X) is
29.40 ± 0.50 mm (1.158 ± 0.020 inch) . - Install elbow (1) onto cover (2).
Show/hide table
| |
| Illustration 1 | g01146941 |
Show/hide table
| |
| Illustration 2 | g01146945 |
Show/hide table
| |
| Illustration 3 | g01146930 |
End By:
- Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Caterpillar Information System:
C13 Engine Engine Oil Pump - Disassemble
C13 Engine Engine Oil Pump - Remove
C13 Engine Engine Oil Cooler - Install
C13 Engine Engine Oil Cooler - Remove
C13 Engine Engine Oil Filter Base - Install
C13 Engine Engine Oil Filter Base - Assemble
C13 Engine Engine Oil Filter Base - Disassemble
C13 Engine Engine Oil Filter Base - Remove
C13 Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13 Engine Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine Inlet and Exhaust Valves - Remove and Install
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C13 Engine Engine Oil Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
3512C Engine for 785D Off-Highway Truck/Tractors Piston and Rings
C13 Engine Water Pump - Remove
C13 Engine Water Pump - Install
C13 Engine Water Temperature Regulator - Remove and Install
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562} Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
C13 Engine Flywheel - Remove
C13 Engine Flywheel - Install
C13 Engine Flywheel Housing - Remove and Install
C13 Engine Rear Power Take-Off (RPTO) - Remove
C7 On-highway Engine Diesel Particulate Filter