Reworked Air Compressors Now Have "R" on the Serial Number Plate {1803, 1804}
- Engine:
- 3054 (S/N: 5YS1-UP)
- Generator Set:
- 3406B (S/N: 2WB1-UP)
- Industrial Engine:
- 3306 (S/N: 23C)
- Marine Engine:
- 3196 (S/N: 2XR1-UP)
- Petroleum Engine:
- C32 (S/N: SMP1-UP)
- 3176B (S/N: 3LZ1-UP)
- 3176C (S/N: 2AW1-UP)
- 3306 (S/N: 64Z1-UP)
- 3412C (S/N: DJN1-UP; BCW1-UP)
- 3512B (S/N: 6WN1-UP)
- 3516 (S/N: 7KM1-UP)
- 3516B (S/N: FDN1-UP; 7RN1-UP; 8CN1-UP)
- 3406C (S/N: KPS1-UP)
- 3456 (S/N: 9BZ1-UP)
- 3520C (S/N: CWY1-UP)
- 3406E (S/N: 6BR1-UP)
- 3412E (S/N: BDT1-UP)
- C-15 (S/N: BEM1-UP)
- C-16 (S/N: BFM1-UP)
- 3412C (S/N: 3JK1-UP)
- C32 (S/N: RNC1-UP)
Show/hide table
Illustration 1 | g01883084 |
The serial number plate without "R" added. |
Show/hide table
Illustration 2 | g01883085 |
(1) The serial number plate with "R" added. |
Reman air compressors are being reworked by the supplier. The air compressors are then put back into the parts distribution system with the same component's serial number and "R" added to the plate. Refer to Illustration 1 and Illustration 2.
Caterpillar Information System:
C6.6 Industrial Engine Refill Capacities and Recommendations
C7.1 Industrial Engine and Generator Set Valve Lash Is Excessive
C15 and C18 Industrial Engines Diesel Particulate Filter - Remove and Install - Clean Emissions Module
C18 Power Module Maintenance Interval Schedule - Standby
C18 Power Module Maintenance Interval Schedule
C7.1 Industrial Engine and Generator Set Cylinder Is Noisy
C7.1 Industrial Engine and Generator Set Engine Has Mechanical Noise (Knock)
C7.1 Industrial Engine and Generator Set Oil Pressure Is Low
C7.1 Industrial Engine and Generator Set Engine Shutdown Occurs Intermittently
C9.3 Engines for Caterpillar Built Machines Engine Monitoring System
C7.1 Industrial Engine Belt Tensioner - Inspect
C7.1 Industrial Engine Engine Oil and Filter - Change
2009/04/01 Reworked Air Compressors Now Have "R" on the Serial Number Plate {1803, 1804}
C13 Engine for Caterpillar Built Machines Cylinder Head - Remove and Install
C9.3 Engines for Caterpillar Built Machines Diagnostic Capabilities
C4.4 Industrial Engine Battery - Replace
C13 Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
C13 Engine for Caterpillar Built Machines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Engines for Caterpillar Built Machines Temperature Sensor (Aftercooler Air) - Remove and Install
C13 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor
C7.1 Industrial Engine Engine Crankcase Breather Element - Replace
C13, C15, and C18 Tier 4 Interim Engines ARD Nozzle - Test
C13 Engine Fuel Transfer Pump - Remove