Cylinder Head - Remove and Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件说明 | 数量 |
A | 4C-5592 | 防粘结剂 | - |
B | 8T-2998 | 润滑剂 | - |
C | 9S-3263 | 螺纹锁固胶 | - |
D | 5P-3931 | 防粘结剂 | - |
开始:
- 拆下凸轮轴齿轮。
- 拆下电子单体喷油器。
- 拆下所有摇臂轴。
- 拆下气门机构罩盖底座。
- 拆下排气歧管。
- 拆下燃油滤清器底座。
- 拆下烟气处理总成。
- 拆下排气感应阀。
- 拆下发动机机油滤清器底座。
- 拆下排气旁通阀。
- 拆下增压压力传感器。
- 拆下螺栓 (1) 和止推盘 (2),以拆下转接接头 (3)。
- 拆下螺栓 (4) 和板 (5)。
Show/hide table
图 2 g01377738 - 拆下密封盘 (6)。
Show/hide table
图 3 g01377739 - 将 O 形密封圈 (8) 和 O 形密封圈 (9) 从密封盘 (7) 上拆下。
Show/hide table
图 4 g01867334 - 拆下螺栓 (10)。
Show/hide table
图 5 g01867354 - 使用适当的起吊设备拆下缸盖 (11)。 缸盖 (11) 的重量约为
293 kg (645 lb) 。Show/hide table图 6 g01867473 - 将油封 (12)、水封 (13) 和密封垫 (14) 从缸体上拆下。
Show/hide table
图 7 g01867515 - 将隔板 (15) 从缸体上拆下。
Show/hide table
图 8 g01867534 - 将密封垫 (16) 从缸体上拆下。
- 将 O 形密封圈 (17) 从缸体中的定位销上拆下。
Show/hide table
图 1 | g01377731 |
- 按相反顺序安装缸盖。
- 将工具 (A) 涂抹在缸盖螺栓 (10) 的螺纹和垫圈上。
Show/hide table
图 9 g01072801 注: 标有 "x" 的螺栓为
216 mm (8.5 in) 长:11, 12, 13, 14, 16, 18, 20, 22, 24 和 26。 其余螺栓为194 mm (7.6 in) 长。 - 按照下列步骤拧紧缸盖螺栓:
- 按数字顺序依次将螺栓 1 到 26 上紧到
270 ± 15 N·m (200 ± 11 lb ft) 的扭矩。 - 按数字顺序依次将螺栓 1 到 26 上紧到
450 ± 15 N·m (330 ± 11 lb ft) 的扭矩。 - 按数字顺序依次将螺栓 1 到 26 重新上紧到
450 ± 15 N·m (330 ± 11 lb ft) 的扭矩。
- 按数字顺序依次将螺栓 1 到 26 上紧到
- 组装前,将工具 (B) 和干净机油 50/50 的混合物涂抹到 O 形密封圈 (8) 和 (9) 上。
- 将工具 (C) 涂抹到螺栓 (1) 的螺纹上。
- 将工具 (A) 涂抹在缸盖螺栓 (10) 的螺纹和垫圈上。
Caterpillar Information System:
C9.3 Tier 4 Interim Engines Engine Cranks but Does Not Start
C6.6 Industrial Engine Lifter Group
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C6.6 Industrial Engine Fuel Filter Base - Single Secondary Fuel Filter Base
C6.6 Industrial Engine Fuel Injection Pump
C7.1 Industrial Engine and Generator Set Indicator Lamps
C6.6 Industrial Engine Fuel Injection Lines
G3520B Engine Maintenance Interval Schedule
C32 Marine Engine Battery Problem
C13, C15, and C18 Tier 4 Interim Engines Alternator Problem - Charging Problem and/or Noisy Operation
C15 and C18 Industrial Engines Fumes Disposal Filter - Remove and Install
C6.6 Industrial Engine Atmospheric Pressure Sensor
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System Backup Alarm Does Not Function
C12 Marine Engines Heat Exchanger - Inspect/Clean
793F and 797F Off-Highway Trucks Braking System Brakes Drag
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install - C15 Engine
C13 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C6.6 Industrial Engine Cylinder Head Valves
C6.6 Industrial Engine Main Bearing Journal
C4.4 Industrial Engine Piston and Rings
C7.1 Industrial Engine and Generator Set Sensors and Electrical Connectors