Heater System Electrical Schematic
The circuit diagram in Illustration 3 shows the circuit for the preheater. The diagram is for preheaters that have a standard switch and a timer.
Show/hide table
Item     | Designation     | Comment     |
A1     | Heater     |     |
A2     | Control module     |     |
B1     | Flame sensor     |     |
B2     | Temperature sensor     |     |
B3     | Temperature limiter     |     |
B4     | thermostat     |     |
BT     | Battery     | Machine battery     |
DS     | Illuminated toggle switch     | Operating indicator     |
E     | Glow pin     |     |
F1     | 10 amp fuse     | Mini circuit breaker     |
F2     | 5 amp fuse     | Mini circuit breaker     |
F3     | 20 amp fuse     | Mini circuit breaker     |
H1     | "HEATING" symbol in the display     | Operating indicator     |
H3     | Symbol     | Light     |
H6     | Red (LED)     | Immediate heat button light, Ready indicator, Switch on control     |
K1     | Relay     | Option for the fan of the machine for the harness     |
M1     | Motor     | Combustion air fan     |
M2     | Motor     | Pump for circulating     |
P2     | Digital timer 1531     | Programmed operation     |
S1     | Toggle switch     | Preheater ON and OFF switch     |
X1     | 4 pin connection     | The plug connects to the control module (2).     |
X2     | 2 pin connection     | The plug connects to the control module (2).     |
X3     | 2 pin connection     | The plug connects to the control module (2).     |
X4     | 2 pin connection     | The plug connects to the control module (2).     |
X5     | 2 pin connection     | The plug connects to the control module (2).     |
X6     | 2 pin connection     | The plug connects to the control module (2).     |
X7     | 2 pin connection     | The plug connects to the control module (2).     |
X8     | 12 pin connection     | The connector goes to the control module (2).     |
X9     | 12 pin connection     | The connector goes to the digital timer.     |
X10     | 2 pin connection     | W-Bus diagnostics     |
X11     | 2 pin connection     | The connector goes to the metering pump (37).     |
X12     | 9 pin connection     | Power and control harness     |
X13     | 8 pin connection     | The connector goes to the 12 pin connection (29) of the digital timer.     |
X14     | 1 pin connection     | The connector goes to pin 10 of the 12 pin connection (29).     |
X15     | 3 pin connection     | The connection goes to the optional interface for the blower of the system.     |
X16     | Relay socket (5 pin)     | Option for the fan of the machine for the harness     |
Y1     | Metering pump     | Fuel pump for the preheater     |
Show/hide table
Illustration 1 | g01887474 |
Preheater |
Show/hide table
Illustration 2 | g01887493 |
Connectors |
Show/hide table
Illustration 3 | g01887433 |
Schematic for the preheater |
Caterpillar Information System:
416E Backhoe Loader Hydraulic and Steering System Ride Control System
2009/02/16 Disposable Paper Air Filters Require Protection {1051, 1054}
Work Tool (Custom) <B>338-0312</B> Log and Lumber Fork Maintenance Interval Schedule
795F AC and 795F AC XQ Off-Highway Trucks Air Filter Element (Inverter Cabinet) - Clean/Replace - Metal Sand Filters
143H and 163H Motor Graders All Wheel Drive All Wheel Drive System
416E, 420E and 430E Backhoe Loaders Power Train Transmission (Direct Drive) - Install
CP44 and CS44 Vibratory Soil Compactors Window Washer Reservoir - Fill
416E, 420E and 430E Backhoe Loaders Power Train Transmission (Direct Drive) - Remove
3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders Diagnostic Trouble Codes
CP44 and CS44 Vibratory Soil Compactors Wheel Nuts - Tighten
120K and 120K Series 2 Motor Graders Engine Supplement Radiator Guard and Support, Aftercooler, and Radiator - Install
CP44 and CS44 Vibratory Soil Compactors Vibratory Support Oil Sample - Obtain
CP44 and CS44 Vibratory Soil Compactors Steering Column Spline (HMU Steering) - Lubricate
120K and 120K Series 2 Motor Graders Machine Systems Fuel Tank - Remove
120K and 120K Series 2 Motor Graders Machine Systems Fuel Tank - Install
CB54, CB54 XW and CB64 Vibratory Compactors Propel System Piston Pump (Propel) (Swashplate Angle) - Check
Installation of the 330-0824 Control Arrangement (Variable Pitch Fan) (Kit){1356} Installation of the 330-0824 Control Arrangement (Variable Pitch Fan) (Kit){1356}
CP44 and CS44 Vibratory Soil Compactors Parking Brake - Check
584 and 584HD Forwarders Machine Preheater Operational Flow Chart
416E Backhoe Loader Hydraulic and Steering System Ride Control Accumulator - Test and Charge
CP44 and CS44 Vibratory Soil Compactors Fuel System - Prime
2009/02/02 A New Rocker Arm Assembly is Available {1123}
795F AC and 795F AC XQ Off-Highway Truck Steering System Solenoid Valve and Manifold (Blower Fan, Final Drive Lubrication, Steering)
2011/09/12 A New Rocker Arm Assembly Is Available {1123}