Work Tool (Custom) <B>338-0312</B> Log and Lumber Fork Caterpillar


Maintenance Interval Schedule

Usage:

938G 4YS
Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.

The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.

Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance.

Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.

Every 10 Service Hours or Daily

Hydraulic Fittings - Inspect
Log Fork - Lubricate

Caterpillar Information System:

795F AC and 795F AC XQ Off-Highway Trucks Air Filter Element (Inverter Cabinet) - Clean/Replace - Metal Sand Filters
143H and 163H Motor Graders All Wheel Drive All Wheel Drive System
416E, 420E and 430E Backhoe Loaders Power Train Transmission (Direct Drive) - Install
CP44 and CS44 Vibratory Soil Compactors Window Washer Reservoir - Fill
416E, 420E and 430E Backhoe Loaders Power Train Transmission (Direct Drive) - Remove
3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders Diagnostic Trouble Codes
CP44 and CS44 Vibratory Soil Compactors Wheel Nuts - Tighten
120K and 120K Series 2 Motor Graders Engine Supplement Radiator Guard and Support, Aftercooler, and Radiator - Install
CP44 and CS44 Vibratory Soil Compactors Vibratory Support Oil Sample - Obtain
CP44 and CS44 Vibratory Soil Compactors Vibratory Support Oil Level - Check
CP44 and CS44 Vibratory Soil Compactors Vibratory Support Oil - Change
416E Backhoe Loader Hydraulic and Steering System Hydraulic Tank and Filter
2009/02/16 Disposable Paper Air Filters Require Protection {1051, 1054}
416E Backhoe Loader Hydraulic and Steering System Ride Control System
584 and 584HD Forwarders Machine Preheater Heater System Electrical Schematic
CP44 and CS44 Vibratory Soil Compactors Steering Column Spline (HMU Steering) - Lubricate
120K and 120K Series 2 Motor Graders Machine Systems Fuel Tank - Remove
120K and 120K Series 2 Motor Graders Machine Systems Fuel Tank - Install
CB54, CB54 XW and CB64 Vibratory Compactors Propel System Piston Pump (Propel) (Swashplate Angle) - Check
Installation of the 330-0824 Control Arrangement (Variable Pitch Fan) (Kit){1356} Installation of the 330-0824 Control Arrangement (Variable Pitch Fan) (Kit){1356}
CP44 and CS44 Vibratory Soil Compactors Parking Brake - Check
584 and 584HD Forwarders Machine Preheater Operational Flow Chart
416E Backhoe Loader Hydraulic and Steering System Ride Control Accumulator - Test and Charge
CP44 and CS44 Vibratory Soil Compactors Fuel System - Prime
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.