A New Throttle Slave Cylinder and Mounting Group is Now Used {1264}
- Load Haul Dump:
- R1300 (S/N: 6QW1-UP)
- R1300GSeries II (S/N: RSL1504-1504,1511-1511,1519-1519,1525-1525,1527-1527,1536-1536)
- R1300G (S/N: LJB1-UP)
Description of Change: A new throttle slave cylinder and mounting group is now used. The new throttle slave cylinder and mounting group provides improved service life.
Adaptable To: The 326-6837 Cylinder and Mounting Gp-Slave is a direct replacement for the 156-0569 Cylinder and Mounting Gp-Slave. Refer to Table 1 and Table 2.
Show/hide table
| Effectivity of the New 326-6837 Cylinder and Mounting Gp-Slave | ||
|---|---|---|
| Model | Effective With | Adaptable To |
| R1300G | S/N:LJB1364-UP | S/N:LJB1-1363 |
| R1300GII | - | S/N:RSL1504 S/N:RSL1511 S/N:RSL1519 S/N:RSL1525 S/N:RSL1527 S/N:RSL1536 |
| R1300 | - | S/N:6QW1-UP |
Show/hide table
| Parts Required to Update Throttle Slave Cylinder and Mounting Group | |||
|---|---|---|---|
| New Part Number | Description | Former Part Number | Qty |
| 8D-4119 | Lever | 5H-6862 | 1 |
| 5P-6438 | Yoke Rod End | 6V-3338 | 1 |
| 6B-1225 | Pin | 7B-7210 | 1 |
| 3B-4615 | Cotter Pin | 3B-4607 | 1 |
| 8C-3121 | Bolt | 4M-5282 | 1 |
| 3E-9860 | Locknut | 6V-8185 | 1 |
| 4M-0061 | Bolt | 4M-6425 | 2 |
Procedure to Update Throttle Slave Cylinder and Mounting Group
- Disconnect yoke (5) from lever (1). Discard pin (2), cotter pin (3) and washer (4) .
Show/hide table
 | |
| Illustration 1 | g01763294 |
View of 156-0569 Slave Cylinder Gp (1) 5H-6862 Lever (2) 7B-7210 Pin (3) 3B-4607 Cotter Pin (4) 8T-4224 Hard Washer (5) 6V-3338 Yoke Rod End (6) 4M-5282 Bolt (7) 6V-8185 Nut (8) 4M-6425 Bolt | |
- Remove and discard yoke (5) .
- Remove and discard bolt (6) and nut (7) .
- Remove and discard lever (1) .
- Remove and discard two bolts (8) .
- Install two bolts (15) .
Show/hide table
 | |
| Illustration 2 | g01793816 |
View of 326-6837 Slave Cylinder Gp (9) 8D-4119 Lever (10) 6B-1225 Pin (11) 3B-4615 Cotter Pin (12) 5P-6438 Yoke Rod End (13) 8C-3121 Bolt (14) 3E-9860 Locknut (15) 4M-0061 Bolt | |
- Install lever (9), bolt (13) and locknut (14) .
- Install yoke (12) .
- Connect yoke (12) using pin (10) and cotter pin (11) .
Caterpillar Information System:
Operational Checking Procedure for the Secondary Steering System Installed on R2900G Load Haul Dumps{4300} Operational Checking Procedure for the Secondary Steering System Installed on R2900G Load Haul Dumps{4300}
Operational Checking Procedure for the Secondary Steering System Installed on R1700G Load Haul Dumps{4300} Operational Checking Procedure for the Secondary Steering System Installed on R1700G Load Haul Dumps{4300}
2008/12/22 A New Protection Cover for the Dashboard is Now Used on PM-102 Cold Planers {7314}
2008/12/22 An Improved Relief Valve is Available for Certain Series E Backhoe Loaders With All Wheel Steering {4322, 5067, 5264, 5479}
2590 Track Feller Buncher Machine Systems Travel on Level Ground - Test and Adjust
2009/12/16 Announcing the 793D Off-Highway Truck Steering Accumulator Upgrade {4331}
AccuGrade For Wheel Tractor-Scrapers Option Key
2590 Track Feller Buncher Machine Systems Piston Pump (Main Hydraulic)
2008/12/29 Operation and Maintenance Manuals Are Updated to Include Maintenance Procedure for Cylinders and a Note Regarding Backhoe Bucket Interference {5102, 5105, 5468, 5808, 6119, 7000, 7222}
2009/02/09 Improved Torque for the Idler Wheel Groups {4159}
2009/03/02 An Improved Grommet And An Improved Harness Are Now Used In The Cab {1429, 1430, 1432, 1434, 7329}
2009/01/05 An Improved Pressure Control Valve Is Now Used In the Transmission {3073, 3074}
2008/12/29 A New Piston is Now Used in Certain Motor Graders {3077, 4267}
Steering Issues May Be Caused By the Shuttle Valve On Some Backhoe Loader Models{5264} Steering Issues May Be Caused By the Shuttle Valve On Some Backhoe Loader Models{5264}
120K and 120K Series 2 Motor Graders Power Train Transmission Oil Filter Base - Disassemble
Measuring the Inner Circumference of the Rubber Tracks on Certain Multi-Terrain Loaders {4198} Measuring the Inner Circumference of the Rubber Tracks on Certain Multi-Terrain Loaders {4198}
120K and 120K Series 2 Motor Graders Power Train Transmission Oil Filter Base - Assemble
2008/12/22 A New Coil is Now Used on the Propel Pump Solenoid on Utility Compactors {5070, 5479}
2009/06/01 New Motor Assemblies for the Air Conditioner Condenser Have Increased Durability {1356, 1360, 1386, 5057}
CB54 and CB64 Asphalt Compactors Machine Systems Water Tank - Remove and Install
795F AC and 795F AC XQ Off-Highway Truck Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks MID 036 - CID 0273 - FMI 00 Turbo Outlet Pressure above normal
2008/12/15 Improved Valve Components Are Used {1100, 1105, 1108}
795F AC and 795F AC XQ Off-Highway Truck Power Train Pump Drive