Clutch Control (Modulation)
Show/hide table
Illustration 1 | g02142054 |
(B) Dimension from the cab floorplate to the bottom edge of the pedal ... 95 ± 6 mm (3.7 ± 0.2 inch)
(C) Length of the pedal travel for activating the limit switch ... 15 ± 3 mm (0.6 ± 0.1 inch)
(E) Dimension from the end of the bolt to the face of the washer ... 16 ± 6 mm (0.6 ± 0.2 inch)
(1) Assembled length of the rod ... 447 ± 3 mm (17.6 ± 0.1 inch)
(2) Torque for the bolt ... 25 ± 6 N·m (221 ± 53 lb in)
(3) Torque for the bolt ... 30 ± 7 N·m (266 ± 62 lb in)
(4) Dimension from the end of the shaft to the face of the housing ... 1.5 ± 1.0 mm (0.06 ± 0.04 inch)
Caterpillar Information System:
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
C7 Engines for Caterpillar Built Machines Event Codes
12K, 140K, 140K Series 2 and 160K Motor Graders Power Train Case and Frame
12K, 140K, 140K Series 2 and 160K Motor Graders Power Train Final Drive
2008/11/17 The 6V-4022 Fuel Injector Tester Is not Available {1251, 1254, 1290, 1713}
120K and 120K Series 2 Motor Graders Hydraulic and Steering System Metering Pump (Steering)
2008/12/29 The Plug in the Control Valve Groups is Updated {5051}
Supplemental Parts Information for the USN Seabee PS-150C Paving Compactor{7000} Supplemental Parts Information for the USN Seabee PS-150C Paving Compactor{7000}
120K and 120K Series 2 Motor Graders Air System and Brakes Air System and Brakes
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2009/02/16 An Improved Guard Assembly for the Fan Guard Is Now Used {1360}
2008/12/29 An Improved Solenoid Valve Is Now Used {5132, 5479}
3306C Engines for Caterpillar Built Machines Turbocharger
C9.3 Engines for Caterpillar Built Machines Fuel System Pressure - Test
CB54, CB54 XW and CB64 Vibratory Compactor Propel System Direction and Speed Control
793F and 793F CMD Off-Highway Truck Power Train Temperature Sensor (Engine Coolant)
2008/11/17 Calibration Fluid for Fuel Nozzle Test Equipment Is Available {0782, 1251, 1254, 1290, 1713}
120K and 120K Series 2 Motor Graders Hydraulic and Steering System Hydraulic and Steering System
120K and 120K Series 2 Motor Graders Hydraulic and Steering System Pump Control Valve (Implement, Steering) - Test and Adjust
2009/01/26 The List of Approved Telehandler Work Tools Has Been Updated {6459, 6501, 6542, 6700, 7405}
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
12K, 140K and 160K Motor Graders Engine Air Filter Service Indicator - Inspect/Replace
2008/11/01 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
C15 and C18 Generator Set Engines Flywheel - Install