Supplemental Parts Information for the USN Seabee PS-150C Paving Compactor{7000} Caterpillar


Supplemental Parts Information for the USN Seabee PS-150C Paving Compactor{7000}

Usage:

PS-150C FPS


Paving Compactor:
PS-150C (S/N: FPS710-710,711-711,713-713)

Introduction




Illustration 1g01051135

This Special Instruction for the USN Seabees PS150C Paving Compactor is a supplement to the commercial parts manual, KEBP0294. The specific machine configuration is identified in the following tables with the additional parts identification that is required.

Parts Information

318-2069 Merchandising Ar

Table 1
MERCHANDISING ARRANGEMENT    
318-2069 MERCHANDISING ARRANGEMENT    
NOTE                     PART NAME     TABLE REFERENCE    
REFERENCE NUMBER ILLUSTRATION NUMBER     PART NUMBER     QTY     1     2     3     4     5     6     Product Level    
            9W-1077     1     Start Switch Gp     2    
            120-7062     1     Water Spray Gp      (1)    
            145-3253     1     Canopy Gp      (1)    
            221-4045     1     Suspension Seat Gp      (1)    
            240-0505     1     Common Ar      (1)    
            241-9394     1     Propel Hydraulic Ar      (1)    
            241-9416     1     Propel Motor and Mounting Gp      (1)    
            243-3552     1     Seat Support Gp      (1)    
            245-7463     1     Wheel Ar      (1)    
            318-2065     1     Wiring gp-NATO     3    
            318-2070     1     Rifle Mtg Gp     4    
            318-2072     1     Paint Gp     6    
            318-4636     1     Instrument Box As     7    
( 1 ) Refer to Parts Manual KEBP0294












9W-1077 Start Switch Gp

Table 2
9W-1077 START SWITCH GP    
NOTE                     PART NAME     TABLE REFERENCE    
REFERENCE NUMBER ILLUSTRATION NUMBER     PART NUMBER     QTY     1     2     3     4     5     6     Product Level    
    1     2     8F-3437     1     Switch Lever        
    2     2     5L-7200     1     Screw        
    3     2     3B-4501     1     Lockwasher        
    4     2     8C-6808     1     Nut        
    5     2     7M-0327     1     Thrust Washer        
    6     2     6V-8364     4     Screw        
    7     2     8F-1434     4     Lockwasher        



Illustration 2g01731758

318-2065 Wiring Gp-NATO

Table 3
318-2065 WIRING GP-NATO    
NOTE                     PART NAME     TABLE REFERENCE    
REFERENCE NUMBER ILLUSTRATION NUMBER     PART NUMBER     QTY     1     2     3     4     5     6     Product Level    
    1     3     5R-4467     1     Receptacle As        
    2     3     318-2066     1     Cable As        
    3     3     318-2067     1     Cable As        
    4     3     318-2068     1     Plate        
    5     3     125-4124     1     Clamp        
M     6     3     5C-2874     4     Nut        
M     7     3     8T-0326     4     Bolt        
    8     3     8T-0328     8     Hard Washer        
M-METRIC PART    



Illustration 3g01733695

318-2070 Rifle Mounting Gp

Table 4
318-2070 RIFLE MTG GP    
NOTE                     PART NAME     TABLE REFERENCE    
REFERENCE NUMBER ILLUSTRATION NUMBER     PART NUMBER     QTY     1     2     3     4     5     6     Product Level    
    1     4     245-0772     1     Mounting Bracket Gp     5    
    2     4     318-4261     1     Platform As        
    3     4     5C-7261     4     Nut        
    4     4     8T-4189     4     Bolt        
    5     4     8T-4224     8     Hard Washer        



Illustration 4g01736693

245-0772 Mounting Bracket Gp

Table 5
245-0772 Mounting Bracket Gp    
NOTE                     PART NAME     TABLE    
REF NMBR ILLUS NMBR     PRT NMBR     QTY     1     2     3     4     5     6     (Product Level)    
    1     5     245-0768     1     Bracket As        
    2     5     245-1106     1     Bracket        
    3     5     245-1107     1     Bracket        
    4     5     245-1108     1     Bracket        
    5     5     245-1109     1     Latch As        
    6     5     5C-9553     2     Bolt        
    7     5     8T-4971     2     Bolt        
    8     5     9X-8256     4     Washer        



Illustration 5g01940515

318-2072 Paint Gp

Table 6
318-2072 PAINT GP    
NOTE                     PART NAME     TABLE REFERENCE    
REFERENCE NUMBER ILLUSTRATION NUMBER     PART NUMBER     QTY     1     2     3     4     5     6     Product Level    
    1     6     1G-5577     4     Fastener Tack        
    2     6     3E-3010     1     Film        
    3     6     5P-8501     3     Padlock        
    4     6     7X-3229     4     Film        
    5     6     8C-4535     1     Film        
C     6     6     105-2922     1     Film        
    7     6     134-7258     1     Film        
E     8     6     135-8013     1     Antifreeze Tag        
G     9     6     164-2306     1     Film        
    10     6     211-9987     1     Film        
A     11     6     239-6986     1     Identification Plate        
    12     6     316-4869     2     Film        
G     13     6     318-2073     2     Stencil        
    14     6     318-4105     1     Film        
D     15     6     318-4832     1     Film        
    16     6     336-8279     1     Plate        
L,B     17     6     311-9286     18     Green Paint        
A-THE PIN IS TO BE LOCATED ON LEFT SIDE FACING LEFT SIDE OF THE MACHINE CENTERED ABOVE REAR TIRES. THE PIN MUST BE STAMPED IN THE METAL ADJACENT TO THE PIN PLATE. THE PIN IS STAMPED SO IT WOULD BE POSSIBLE TO DETERMINE THE PIN, SHOULD THE PIN PLATE BE REMOVED OR LOST. THE CONCEALED PIN IS TO BE STAMPED INSIDE RIGHT FRONT WHEEL WELL UPPER LEFT CORNER WHILE SEATED OR WHEN LOOKING FROM FRON MACHINE TOWARDS REAR.
B-NOT SHOWN
C-ALIGN DECAL WITH SIGHT GAGE
D-CENTER BETWEEN LIGHT CUTOUTS ±5mm
E-SECURE TAG TO COOLANT RECOVERY TANK
L-SOLD BY THE LITER
G-TO BE PAINTED NON-GLOSS BLACK    



Illustration 6g01899833

318-4636 Box As

Table 7
318-4636 BOX AS    
NOTE                     PART NAME     TABLE REFERENCE    
REFERENCE NUMBER ILLUSTRATION NUMBER     PART NUMBER     QTY     1     2     3     4     5     6     Product Level    
    1     7     7T-1099     5     Link        
    2     7     102-8497     3     Bracket        
    3     7     318-4260     1     Box        
    4     7     1F-0750     2     Weld Nut        
M     5     7     8T-3612     3     Weld Nut        
M-METRIC PART    



Illustration 7g01741233

Caterpillar Information System:

120K and 120K Series 2 Motor Graders Air System and Brakes Air System and Brakes
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2009/02/16 An Improved Guard Assembly for the Fan Guard Is Now Used {1360}
2008/12/29 An Improved Solenoid Valve Is Now Used {5132, 5479}
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Cranks but Will Not Start
2008/12/01 A New Bearing is Now Used on the Support for the Conveyor on Certain Cold Planers {7074}
2008/12/29 New Software Prevents the Discrepancy Between the Display on the Monitor and the Service Hour Meter Reading for Certain Excavators {7490, 7601, 7610, 7620}
The Procedure for Servicing the Air Cleaner on Articulated Trucks{1051, 1054} The Procedure for Servicing the Air Cleaner on Articulated Trucks{1051, 1054}
416E Backhoe Loader Alternate Exit
IT38H Integrated Toolcarrier and 938H Wheel Loader Alternator Air Vent Line and Screen - Clean
2008/12/01 Water Temperature Regulator {1355, 1380}
793F and 797F Off-Highway Trucks Chassis Electronic Control System System Schematic
2008/12/29 The Plug in the Control Valve Groups is Updated {5051}
120K and 120K Series 2 Motor Graders Hydraulic and Steering System Metering Pump (Steering)
2008/11/17 The 6V-4022 Fuel Injector Tester Is not Available {1251, 1254, 1290, 1713}
12K, 140K, 140K Series 2 and 160K Motor Graders Power Train Final Drive
12K, 140K, 140K Series 2 and 160K Motor Graders Power Train Case and Frame
C7 Engines for Caterpillar Built Machines Event Codes
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
120K and 120K Series 2 Motor Graders Power Train Clutch Control (Modulation)
3306C Engines for Caterpillar Built Machines Turbocharger
C9.3 Engines for Caterpillar Built Machines Fuel System Pressure - Test
CB54, CB54 XW and CB64 Vibratory Compactor Propel System Direction and Speed Control
793F and 793F CMD Off-Highway Truck Power Train Temperature Sensor (Engine Coolant)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.