Specifications
Illustration 1 | g01505983 |
(1) Pressure port (2) Tank port (3) Right port (4) Left port (5) Load signal port |
Displacement of the pump per revolution ... 120 cc (7.3 in3)
Flow rating ... 3.8 to 30.0 L/min (1.0 to 7.9 US gpm)
Inlet pressure rating ... 20700 kPa (3000 psi)
Return pressure rating ... 2100 kPa (305 psi)
Pressure setting for the load sensing relief valve ... 17200 kPa (2500 psi)
Pressure setting for the cylinder relief valve ... 23400 kPa (3400 psi)
Removal Procedure
- Release the pressure in the hydraulic system.
- Remove panels (1) .
Illustration 2 | g01625876 |
- Remove panel (2) . Repeat for opposite side.
Illustration 3 | g01625878 |
- Remove retaining ring (3) .
Illustration 4 | g01625879 |
- Remove pedal (4) and spring (5) .
Illustration 5 | g01625881 |
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Disconnect hose assemblies (7) from steering metering pump (8) . Disconnect hose (6) .
Illustration 6 | g01625882 |
- Remove bolts (9) . Remove bolt (10) and remove steering metering pump (8) .
Note: Do not remove bolt (11) .
Illustration 7 | g01625888 |
Installation Procedure
- Install steering metering pump (8) in the reverse order of removal.