Procedure to Apply Sealant to the Implement Joystick{5705} Caterpillar


Procedure to Apply Sealant to the Implement Joystick{5705}

Usage:

414E ELB
Backhoe Loader:
414E (S/N: ELB1-UP)

Introduction

The joystick on the 414E Backhoe Loader can become contaminated. RTV Silicone Sealant may be applied to the joystick in order to keep the joystick from becoming contaminated.

Problem

Water or dust may contaminate the joystick. The contamination may cause the joystick to fail.

Solution




    Illustration 1g01626100

  1. Remove four bolts (1) from the machine.



    Illustration 2g01625911

  1. Remove the two setscrews (2) .



    Illustration 3g01625930

  1. Apply 8T-9014 Silicone Sealant to the right side of the opening.



    Illustration 4g01625954

  1. Apply 8T-9014 Silicone Sealant to the left side of the opening.



    Illustration 5g01625977

  1. Apply 8T-9014 Silicone Sealant to the top of the joystick control.

    Note: Be sure not to apply an excessive amount of 8T-9014 Silicone Sealant . This will cause the function of the rocker switch of the joystick control to not function properly.

  1. Place the two sections of the joystick together. Apply pressure to both sections of the joystick.

  1. Be sure to allow the 8T-9014 Silicone Sealant to cure.

  1. Apply pressure to both sections of the joystick and secure the set screws (2). This will ensure proper sealing between the base of the joystick and the handle.



    Illustration 6g01626114

  1. Place the joystick onto the machine. Place four bolts (1) onto the machine.

Caterpillar Information System:

PL61 Pipelayer Machine Systems Piston Pump (Implement) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Screen (Hoist) - Assemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Screen (Hoist) - Disassemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Screen (Hoist) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Screen (Hoist) - Remove
Procedure to Install a New Proportional Valve and Software on Certain Cold Planers{5479, 7620} Procedure to Install a New Proportional Valve and Software on Certain Cold Planers{5479, 7620}
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Oil Cooler (Brake) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Oil Cooler (Brake) - Remove
PL61 Pipelayer Machine Systems Piston Pump (Implement) - Remove
2008/12/22 A New Tire Rim is Now Used on Certain Pneumatic Compactors {4209}
2008/09/15 An Improved Track Shoe Is Being Installed {4172}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Lift Arms - Install
430E Backhoe Loader Extendable Stick - Remove and Install
PL61 Pipelayer Power Train Piston Pump (Hydrostatic) - Remove
430E Backhoe Loader Service Brake Control - Remove and Install
430E Backhoe Loader Metering Pump (Steering) - Remove and Install
587R Pipelayer Hydraulic System Accumulator
430E Backhoe Loader Lift Arms - Remove and Install
2008/08/18 An Improved Water Pump Is Now Used {1361}
Failed Service Meters{7478} Failed Service Meters{7478}
2008/09/22 A Filtered Vent is Available for the Fuel Tank Fast Fill Vent {1710}
430E Backhoe Loader Quick Coupler - Remove and Install
Installation Instructions for the 330-0826 Control Arrangement (Variable Pitch Fan) (Kit){1356, 1386, 1387, 138R} Installation Instructions for the 330-0826 Control Arrangement (Variable Pitch Fan) (Kit){1356, 1386, 1387, 138R}
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.