Piston Pump (Implement) - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Check the O-ring seals for wear or for damage. Replace the components, if necessary.
- Attach a suitable lifting device to implement piston pump (8). The weight of implement piston pump (8) is approximately
45 kg (100 lb) . - Use the suitable lifting device in order to position implement piston pump (8) to the machine. Install bolts (9).
Show/hide table
Illustration 2 g01625711 - Connect hose assembly (7), hose assembly (6), hose assembly (4), and hose assembly (5).
Show/hide table
Illustration 3 g01625696 - Install bolts (1).
- Connect hose assembly (2) and hose assembly (3).
Show/hide table
Illustration 1 | g01625729 |
End By:
- Install the gear pump. Refer to Disassembly and Assembly, "Gear Pump (Hydraulic Fan) - Install".
- Install the rollover protective structure. Refer to Disassembly and Assembly, "Rollover Protective Structure (ROPS) - Remove and Install".
Caterpillar Information System:
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Screen (Hoist) - Assemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Screen (Hoist) - Disassemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Screen (Hoist) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Screen (Hoist) - Remove
Procedure to Install a New Proportional Valve and Software on Certain Cold Planers{5479, 7620} Procedure to Install a New Proportional Valve and Software on Certain Cold Planers{5479, 7620}
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Oil Cooler (Brake) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Oil Cooler (Brake) - Remove
PL61 Pipelayer Machine Systems Piston Pump (Implement) - Remove
2008/12/22 A New Tire Rim is Now Used on Certain Pneumatic Compactors {4209}
2008/09/15 An Improved Track Shoe Is Being Installed {4172}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Lift Arms - Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Lift Arms - Remove
Procedure to Apply Sealant to the Implement Joystick{5705} Procedure to Apply Sealant to the Implement Joystick{5705}
430E Backhoe Loader Extendable Stick - Remove and Install
PL61 Pipelayer Power Train Piston Pump (Hydrostatic) - Remove
430E Backhoe Loader Service Brake Control - Remove and Install
430E Backhoe Loader Metering Pump (Steering) - Remove and Install
587R Pipelayer Hydraulic System Accumulator
430E Backhoe Loader Lift Arms - Remove and Install
2008/08/18 An Improved Water Pump Is Now Used {1361}
Failed Service Meters{7478} Failed Service Meters{7478}
2008/09/22 A Filtered Vent is Available for the Fuel Tank Fast Fill Vent {1710}
430E Backhoe Loader Quick Coupler - Remove and Install
Installation Instructions for the 330-0826 Control Arrangement (Variable Pitch Fan) (Kit){1356, 1386, 1387, 138R} Installation Instructions for the 330-0826 Control Arrangement (Variable Pitch Fan) (Kit){1356, 1386, 1387, 138R}