Turbocharger
Show/hide table
Illustration 1 | g01616117 |
Note: Before assembly, lubricate the threads and the bearing surface of the bolts (1) and the bolts (2) with 4C-5599 Anti-Seize Compound.
(1) Torque for eight bolts ...
Show/hide table
Illustration 2 | g01616133 |
Use the following procedure in order to tighten the clamp assemblies (2):
- Tighten the clamp assemblies to
14 ± 3 N·m (125 ± 27 lb in) . - Gently tap around the clamp assemblies.
- Again, tighten the clamp assemblies to
14 ± 3 N·m (125 ± 27 lb in) .
Use the following procedure in order to tighten the bolts for the half flange (3):
- Tighten bolts (4) in any sequence to
54 ± 5 N·m (40 ± 4 lb ft) . - Tighten bolts (5) in any sequence to
54 ± 5 N·m (40 ± 4 lb ft) .
Caterpillar Information System:
C6.6 Marine Generator Set Fuel Injection
C6.6 Marine Generator Set V-Belt - Test
C6.6 Marine Generator Set Vibration Damper - Check
C6.6 Marine Generator Set Cooling System - Test
C6.6 Marine Generator Set Cooling System - Check - Overheating
C6.6 Marine Generator Set Power Sources
C6.6 Marine Generator Set Electrical System
C6.6 Marine Generator Set Cooling System
C6.6 Marine Generator Set Basic Engine
C6.6 Marine Generator Set Engine Valve Lash - Inspect/Adjust
3500B Locomotive Engines Air Inlet and Exhaust Lines
3500B Locomotive Engines Air Inlet and Exhaust Lines
C6.6 Marine Generator Set Air Inlet and Exhaust System
C27 and C32 Industrial and Petroleum Engines Alternator and Regulator
C6.6 Marine Generator Set Engine Oil Cooler - Inspect
C6.6 Marine Generator Set Glossary of Electronic Control Terms
3500C Marine Propulsion Engines Diagnostic Capabilities
3500B Locomotive Engines Turbocharger
3500C Marine Propulsion Engines Coolant Temperature Is High
3500C Marine Propulsion Engines Coolant Temperature Is Low
3500C Marine Propulsion Engines Crankcase Pressure Is High
3500C Marine Propulsion Engines Engine Overspeeds
3500C Marine Propulsion Engines Engine Top Speed Is Not Obtained
C6.6 Marine Generator Set Fuel Injection Pump