Turbocharger Exhaust Temperature Sensor
Show/hide table
| |
| Illustration 1 | g02906318 |
Show/hide table
| Specification for 247-7635 Temperature Sensor Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | - | - | Before assembly, apply Loctite C5A copper anti-seize compound to the threads of the temperature sensor group. |
| - | - | Final installation torque for the temperature sensor group is |
|
| - | - | Operating voltage is 7.5 to 8.5 VDC. | |
| - | - | Output type is PWM. | |
| - | - | Output frequency is 500 ± 100 Hz. | |
Caterpillar Information System:
C32 Petroleum Generator Sets Generator Bearing - Inspect
3512B Generator Set Engine Thermocouple
320 Variable Gauge OEM Undercarriage Machine System Specifications Travel Motor Lines
G3412C, G3508, G3512 and G3516 Engines Status Control Module Engine Cranks but Does Not Start
G3412C, G3508, G3512 and G3516 Engines Status Control Module Symptom Troubleshooting
G3412C, G3508, G3512 and G3516 Engines Status Control Module Service Tools
G3412C, G3508, G3512 and G3516 Engines Status Control Module General Information
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050} Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
3512B Generator Set Engine Pressure Transducer
3512B Generator Set Engine Pressure Contactor
3500B Locomotive Engines Cylinder Head Valves
C27 and C32 Industrial and Petroleum Engines Vibration Damper and Pulley
2008/08/01 The Intake Valve Actuator Response Test Is Updated {1130}
3512C Engine for 785D Off-Highway Trucks/Tractors Turbocharger
2009/09/07 An Improved Exhaust Seal for the Exhaust Bypass Is Used {1057}
2008/07/21 Guidelines for the Replacement of Fuel Injectors {1251, 1290}
New Secondary Fuel Filter{1261} New Secondary Fuel Filter{1261}
2008/09/01 Improved Exhaust Bellows and Exhaust Bellows Seals Are Used {1059}
2008/08/01 A New Injector Harness and Valve Cover Base are Used {1120, 1408, 1900}
2008/09/08 An Improved Lifter Assembly Is Available for C280 and 3600 Engines That Operate in Low Load Applications {1209, 1210}
2008/09/01 Procedure to Clean the Oil Passage in the Exhaust Rocker Arm {1123}
G3412C, G3508, G3512 and G3516 Engines Status Control Module Engine Does Not Crank
2008/07/28 A New Camshaft Journal Is Available for Use when the Former Camshaft Segment with the Thin Flange Is Replacedby a Current Camshaft Segment with a Thick Flange {1210}
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Crankcase Breather