Pressure Transducer
Show/hide table
 | |
| Illustration 1 | g00567974 |
Input pressure range ... 0 to 1000 kPa (0 to 145 psi)
Input voltage ... 10 to 32 VDC
Output signal ... 4 to 20 mA
Maximum operating pressure ... 2000 kPa (290 psi)
Maximum output current ... 28 mA
Caterpillar Information System:
3512B Generator Set Engine Pressure Contactor
3500B Locomotive Engines Cylinder Head Valves
C27 and C32 Industrial and Petroleum Engines Vibration Damper and Pulley
2009/04/20 An Improved Radio Power Converter is used on Excavators. {1408, 1421, 7338}
C18 Generator set and C18 Marine Engines Vibration Damper and Pulley - Remove and Install
2008/09/08 Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1000, 1202}
TH48-E80 Oil/Gas Transmission Torque Converter - Install
3508C, 3512C and 3516C Locomotive Engines Prelube Pressure Switch
TH48-E80 Oil/Gas Transmission Torque Converter - Remove
C27 and C32 Industrial and Petroleum Engines Engine Oil Pan
C27 and C32 Industrial and Petroleum Engines Engine Oil Pan
C27 and C32 Industrial and Petroleum Engines Engine Oil Pan
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050} Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
G3412C, G3508, G3512 and G3516 Engines Status Control Module General Information
G3412C, G3508, G3512 and G3516 Engines Status Control Module Service Tools
G3412C, G3508, G3512 and G3516 Engines Status Control Module Symptom Troubleshooting
G3412C, G3508, G3512 and G3516 Engines Status Control Module Engine Cranks but Does Not Start
320 Variable Gauge OEM Undercarriage Machine System Specifications Travel Motor Lines
3512B Generator Set Engine Thermocouple
C32 Petroleum Generator Sets Generator Bearing - Inspect
3512C Engine for 785D Off-Highway Truck/Tractors Turbocharger Exhaust Temperature Sensor
2008/08/01 The Intake Valve Actuator Response Test Is Updated {1130}
3512C Engine for 785D Off-Highway Trucks/Tractors Turbocharger
2009/09/07 An Improved Exhaust Seal for the Exhaust Bypass Is Used {1057}