3508C, 3512C and 3516C Locomotive Engines Caterpillar


Prelube Pressure Switch

Usage:

3508C F1X


Illustration 1g02417236

Table 1
Specification for 3N-1400 Pressure Switch 
Item  Qty  Part  Specification Description 
3N-1400 Pressure Switch  Torque to 22 ± 3 N·m (195 ± 27 lb in)
Contact position is Normally open below deactuation pressure.
6V-8376 Screw  Torque to 1.7 ± 0.3 N·m (15.0 ± 2.7 lb in)

Caterpillar Information System:

TH48-E80 Oil/Gas Transmission Torque Converter - Remove
C27 and C32 Industrial and Petroleum Engines Engine Oil Pan
C27 and C32 Industrial and Petroleum Engines Engine Oil Pan
C27 and C32 Industrial and Petroleum Engines Engine Oil Pan
3512C Engine and 785D Off-Highway Truck/Tractors ECM - Replace
3512C Petroleum Engines Intake Manifold Air Temperature Is High
3512B and 3516B Engines Piston and Rings - Two-Piece Piston
C18 Generator set and C18 Marine Engines Aftercooler - Install
C18 Generator set and C18 Marine Engines Aftercooler - Remove
C18 Marine Generator Set Engine Valve Lash - Inspect/Adjust
3412E and C30 Marine Engines System Pressure Release
3500C Marine Auxiliary Engines Diagnostic Trouble Codes
TH48-E80 Oil/Gas Transmission Torque Converter - Install
2008/09/08 Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1000, 1202}
C18 Generator set and C18 Marine Engines Vibration Damper and Pulley - Remove and Install
2009/04/20 An Improved Radio Power Converter is used on Excavators. {1408, 1421, 7338}
C27 and C32 Industrial and Petroleum Engines Vibration Damper and Pulley
3500B Locomotive Engines Cylinder Head Valves
3512B Generator Set Engine Pressure Contactor
3512B Generator Set Engine Pressure Transducer
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050} Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
G3412C, G3508, G3512 and G3516 Engines Status Control Module General Information
G3412C, G3508, G3512 and G3516 Engines Status Control Module Service Tools
G3412C, G3508, G3512 and G3516 Engines Status Control Module Symptom Troubleshooting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.