Improved K110 Adapters are now available for Wheel Loaders and Excavators {6800}
- Excavator:
- All Excavators using K110 Adapters
- Wheel Loader:
- All Wheel Loaders using K110 Adapters
- All Excavators using K110 Adapters
The design of the K110 adapter has been improved. Finite analysis of the design has been performed. The result of the analysis has shown that opening up the cavity will substantially reduce the loading stresses in the lower portion of the adapter nose.
Show/hide table
 | |
| Illustration 1 | g01603153 |
Former K110 Adapter | |
Show/hide table
 | |
| Illustration 2 | g01603516 |
Improved K110 Adapter | |
All former K-110 tips and all new K-110 tips and retainers can be used with the improved tip adapters.
Show/hide table
| New Part Numbers and Former Part Numbers for K-110 Tip Adapters for Excavators | ||
|---|---|---|
| New | Former | Excavator Adapter Two strap |
| 309-1114 | 232-0114 | Center |
| 309-1115 | 232-0115 | Right Hand |
| 309-1116 | 232-0116 | Left Hand |
Show/hide table
| New Part Numbers and Former Part Numbers for K110 Tip Adapters for Wheel Loaders | ||
|---|---|---|
| New | Former | Wheel Loader Adapter Two strap |
| 315-0114 | 232-2114 | Center |
| 315-0115 | 232-2115 | Right Hand |
| 315-0116 | 232-2116 | Left hand |
| New | Former | Wheel Loader Adapter Two strap Long Life |
| 309-1110 | 229-7110 | Center |
| 309-1111 | 229-7111 | Right Hand |
| 309-1112 | 229-7112 | Left Hand |
| New | Former | Wheel Loader Adapter Flush Mount |
| 309-1113 | 232-2117 | Flush Mount |
| New | Former | Wheel Loader Bolt On Tip Adapter |
| 315-0117 | 232-2110 | Center |
| 315-0118 | 223-8118 | Right Hand |
| 315-0119 | 223-8119 | Left Hand |
Caterpillar Information System:
2008/07/07 Improved Links Are Available For Certain Thumbs {6513, 6547}
C175-16 and C175-20 Engines for Caterpillar Built Machines Idler Gears (Front) - Remove and Install
422E and 428E Backhoe Loaders Before Roading the Machine
3512C Engine and 785D Off-Highway Truck/Tractors Component Location
3512C Engine and 785D Off-Highway Truck/Tractors System Overview
785D OEM Off-Highway Truck Machine Systems Check Valve (Rear Air/Hydraulic Cylinder) - Remove and Install
785D OEM Off-Highway Truck Machine Systems Check Valve (Front Air/Hydraulic Cylinder) - Remove and Install
785D OEM Off-Highway Truck Machine Systems Brake Tank (Makeup) - Remove and Install
MINEGEM Machine Control ; Guidance Products Circuit Breakers - Reset - R1300G LJB
R1300G Load Haul Dump Braking System Pressure Sensor (Transmission Oil)
793F Off-Highway Truck Rollover Protective Structure (ROPS) - Inspect
1390 Track Feller Buncher Operational Checks
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems Swing Motor Relief Valve Pressure - Test and Adjust
Remote Forward, Neutral, and Reverse Switch May Not Operate Correctly{3065, 7332} Remote Forward, Neutral, and Reverse Switch May Not Operate Correctly{3065, 7332}
AP600D Asphalt Paver Machine Systems General Information (Generator System)
AP600D Asphalt Paver Machine Systems Hydraulic Schematic (Generator System)
2008/07/21 Improvements Have Been Made to the Caterpillar Monitoring System {7450, 7451, 7490}
AP600D Asphalt Paver Machine Systems Operator Controls (Generator)
320D and 323D Excavators Machine System Specifications Accumulator (Pilot)
PL61 Pipelayer Machine Systems Hook Winch - Disassemble
2009/03/30 The Installation of the Shim Pack is Updated for the Front Wheel Bearing {3259, 4201, 4205}
AP600D Asphalt Paver Machine Systems Electrical Schematic (Generator System)
AP600D Asphalt Paver Machine Systems Location Of Components (Generator System)
Difficulty in Accessing the Grease Zerks on 414E Backhoe Loaders{7054, 7120} Difficulty in Accessing the Grease Zerks on 414E Backhoe Loaders{7054, 7120}