- Backhoe Loader:
- 416C (S/N: 1WR1-UP)
- Integrated Toolcarrier:
- IT12 (S/N: 2YC1-UP; 4NC1-UP)
- Wheel Loader:
- 924G (S/N: DDA1-UP; RBB1-UP; WMB1-UP; AAN1-UP; 9SW1-UP; 3PZ1-UP)
- 420D (S/N: BMC1-UP; MBH1-UP; BLN1-UP)
- 420E (S/N: KMW1-UP)
- 426C (S/N: 1YR1-UP)
- 428D (S/N: BXC1-UP; BNS1-UP; BMT1-UP; DSX1-UP)
- 428E (S/N: SNL1-UP)
- 430D (S/N: BML1-UP)
- 430E (S/N: DDT1-UP)
- 432D (S/N: BLD1-UP; WEP1-UP; TDR1-UP)
- 432E (S/N: BXE1-UP)
- 434E (S/N: FSH1-UP)
- 436C (S/N: 2AR1-UP)
- 438D (S/N: BPE1-UP; BPN1-UP)
- 442D (S/N: TBD1-UP; BRG1-UP; SMJ1-UP; BRY1-UP)
- 442E (S/N: GKZ1-UP)
- IT12B (S/N: 1KF1-UP)
- IT14B (S/N: 3NJ1-UP)
- IT14F (S/N: 4EL1-UP)
- IT14G (S/N: FWL1-UP; 8ZM1-UP; KZN1-UP; 1WN1-UP)
- IT18 (S/N: 7ZB1-UP; 9NB1-UP)
- IT18B (S/N: 4ZD1-UP; 1DF1-UP; 2NJ1-UP)
- IT18F (S/N: 6ZF1-UP; 5EJ1-UP)
- IT24F (S/N: 4NN1-UP; 6KN1-UP)
- IT28 (S/N: 8JB1-UP; 2KC1-UP)
- IT28B (S/N: 5SD1-UP; 1HF1-UP; 1JK1-UP)
- IT28F (S/N: 1JL1-UP; 3CL1-UP)
- IT28G (S/N: WAC1-UP; 8CR1-UP; 9AR1-UP; DBT1-UP)
- 924H (S/N: HXC1-UP; JTM1-UP)
- 928G (S/N: DJD1-UP; WLG1-UP; 6XR1-UP; 7SR1-UP)
- 928HZ (S/N: BYD1-UP; CXK1-UP)
- 930G (S/N: TWR1-UP; TFW1-UP)
- 930H (S/N: DHC1-UP; FTD1-UP)
Primary Application for IT Pallet Fork and Carriage
Many products or materials ship on wooden pallets and are kept on these pallets for storage. For this reason, carriages, and forks are used to transport palletized material to and from trucks, loading docks, and storage areas.
In agricultural applications, pallet forks are used to handle and move bales of hay, chemical or water tanks, and various palletized materials such as feed or seed.
Construction sites around the world use pallet forks to lift, move, and place a variety of materials throughout the job site.
NOTICE |
---|
Do not lift the machine using the pallet forks. The machine weight can damage the lower weldment causing the fork to lift off the carriage. |
Illustration 1 | g01601313 |
(1) Load Rated Weldment: This load is hydraulically limited by the machine lift and tilt circuits. (2) Non-Load Rated Weldment: The machine lower and dump circuits can lift the machine and overload the fork. |
The working load is distributed to the top weldment (1) for which the fork is load rated.
Note: The lower weldment (2) is not intended to carry machine loads.