TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Caterpillar

Illustration 1	g01521806

(1) Lubricate the bore lightly with the lubricant that is being sealed.

(2) Lubricate the groove and lubricate the O-ring seal immediately prior to assembling the bearing.

(3) 140-2741 Spring

Length under test force ... 4.42 mm (0.17 inch)

Test force ... 1724 ± 138 N (388 ± 31 lb)

Outside diameter ... 136 mm (5.4 inch)

(4) Apply 6V-6640 Sealant to both sides of washer prior to assembly.

Tighten the 162-1498 Bolt to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)

(5) Tighten the 148-8406 Plug As to the following torque. ... 90 ± 15 N·m (66 ± 11 lb ft)

Illustration 2	g01521785

(6) Tighten the 176-0184 Drain Plug As to the following torque. ... 90 ± 15 N·m (66 ± 11 lb ft)

Illustration 3	g01521938

(7) Tighten the 263-9575 Bolt to the following torque. ... 125 ± 10 N·m (92 ± 7 lb ft)

(8) 9M-8808 Springs

Length under test force ... 15.52 mm (0.61 inch)

Test force ... 80 ± 2.22 N (18 ± 0.5 lb)

Free length after test ... 22.53 mm (0.89 inch)

Outside diameter ... 13.23 mm (0.52 inch)

Illustration 4	g01521939

(9) 213-9864 Spring

Length under test force ... 55.12 mm (2.2 inch)

Test force ... 124.9 ± 6.2 N (28 ± 1.4 lb)

Free length after test ... 60.2 mm (2.37 inch)

Outside diameter ... 13.91 mm (0.55 inch)

Illustration 5	g01521940

(10) 1S-8480 Spring

Length under test force ... 66.5 mm (2.6 inch)

Test force ... 222.4 ± 17.8 N (50 ± 4 lb)

Free length after test ... 83.1 mm (3.3 inch)

Outside diameter ... 14.27 mm (0.56 inch)

Illustration 6	g01521942

(11) 213-8581 Spring

Length under test force ... 121.46 mm (4.8 inch)

Test force ... 239.3 ± 12 N (54 ± 2.7 lb)

Free length after test ... 131.4 mm (5.2 inch)

Outside diameter ... 14.24 mm (0.56 inch)

(1) Manufactured thickness of 134-8361 Plate ... 4 ± .08 mm (0.16 ± 0.003 inch)

(2) Manufactured thickness of 276-0017 Plate ... 4 ± 0.13 mm (0.16 ± 0.005 inch)

(3) (4) (5) (6) Manufactured thickness of 154-5613 Plate ... 5 ± 0.13 mm (0.20 ± 0.005 inch)

Note: In order to reuse the clutch plates and disc assemblies that are contained in this transmission, refer to Guideline for Reusable Parts and Salvage Operations, SEBF8115.