Injection Actuation Pressure Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect harness assembly (2).
- Remove injection actuation pressure sensor (1).
- Remove the O-ring seal from injection actuation pressure sensor (1).
Show/hide table
| |
| Illustration 1 | g01521320 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the O-ring seal on injection actuation pressure sensor (1).
- Install injection actuation pressure sensor (1). Tighten injection actuation pressure sensor (1) to a torque of
20 ± 2 N·m (15 ± 1 lb ft) . - Connect harness assembly (2).
Show/hide table
|
| |
| Illustration 2 | g01521320 |
Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Caterpillar Information System:
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1615 - FMI 03
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073} Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
C6.6 Marine Generator Set Fire Prevention and Explosion Prevention
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1178 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1178 - FMI 04
C7 PETROLEUM Petroleum Engine Fuel Pressure Sensor - Remove and Install
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Transmission Planetary - TH35 Drop Box
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1178 - FMI 03
Replacement of Incorrect Lifter Assemblies on 3116 Engines{1209} Replacement of Incorrect Lifter Assemblies on 3116 Engines{1209}
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1160 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1130 - FMI 03
2008/05/19 Improved Fuel Injector {1251, 1254, 1290, 1713}
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1615 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1615 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1661 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1661 - FMI 05
C7 PETROLEUM Petroleum Engine Speed/Timing Sensor - Remove and Install
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1661 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1931 - FMI 03
G3304 and G3306 Engines Engine Speed Sensor
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1931 - FMI 05
C7 PETROLEUM Petroleum Engine Turbocharger Outlet Pressure Sensor - Remove and Install
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1931 - FMI 06
C27 and C32 Industrial Engines Walk-Around Inspection