- Engine:
- 3116 (S/N: 7HJ13380-13387; 3AF527-527)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
The lifter assemblies on the engines that are listed above are incorrect. Certain 0R-4565 Cylinder Block Gp with date codes from 06 February 2008 to 14 February 2008 also contain incorrect lifter assemblies. The date codes that are listed above are located on the tag of the shipping container that contains the part number. The date code appears as DDMMYY code.
Solution
The 4P-7738 Lifter Shaft Assembly is a direct replacement for the 101-3257 Lifter Shaft Assembly .
 | |
| Illustration 1 | g01521838 |
(1) 101-3256 Lifter Shaft (2) 2 hole configuration (3) 4P-7737 Lifter Shaft (4) 3 hole configuration | |
| Parts that Are Required for the Installation of 4P-7738 Lifter Shaft Assembly | ||
| Quantity | Part Number | Description |
| 3 | 4P-7738 | Lifter Shaft Assembly |
| 3 | 4Y-9652 | Gasket |
| 1 | 113-6250 | Gasket |
| 1 | 119-2940 | Gasket |
| 1 | 1T-1068 | O-Ring Seal |
The part numbers that are required in order to replace the lifter assembly are listed above in Table 1. Replace the 101-3256 Lifter Shaft (1) that has the 2 hole configuration (2) with the 4P-7737 Lifter Shaft (3) that has the 3 hole configuration (4). Refer to Illustration 1. Refer to the proper engine Disassembly and Assembly manual in order to replace the lifter assembly.