2012/10/04 Caterpillar


Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Usage:

769C 01X
Caterpillar Products:
  • All
  • Service Magazine SEPD1507, 04 October 2012, "Procedure to Test the Position Sensor of the Hydraulic Cylinder". Disregard this article. See the replacement article that follows.

    A Special Instruction has been published that contains a procedure that has been developed in order to test "In-Cylinder" sensors. This procedure is applicable to the sensors that are listed in Table 1.

    Note: Table may not contain all the hydraulic cylinder position sensor part numbers available.

    Table 1
    Sensor Class Reference Table (1)    
    Part Number     Sensor Class         Part Number     Sensor Class    
    212-1490     3     249-5193 3    
    213-2491     3     252-6361 3    
    215-8934     3     252-6362 3    
    217-5776     3     252-6363 3    
    217-6566     2     252-7813 3    
    217-6567     2     262-5906 3    
    219-4714     2     267-5257 3    
    222-1461     2     271-9153 3    
    228-0805     2     274-1640 3    
    231-4627     2     280-2243 3    
    232-0241     2     281-8989 3    
    234-9005     2     294-2963 2    
    216-2954     3         328-6117     3    
    ( 1 ) Table may not contain all the hydraulic cylinder position sensor part numbers available.

    Refer to Special Instruction, REHS7338, "Procedure to Test the Position Sensor of a Hydraulic Cylinder" for the correct procedure.

    Caterpillar Information System:

    Air Conditioning and Heating R134a for All Caterpillar Machines Heating and Air Conditioning Service Publications
    Air Conditioning and Heating R134a for All Caterpillar Machines Air Conditioning System Troubleshooting
    C7 PETROLEUM Petroleum Engine Atmospheric Pressure Sensor - Remove and Install
    345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System Event Code List
    C15 Petroleum Generator Set Engines Cylinder Head
    2008/04/28 Improved Turbocharger {1052, 1053}
    C6.6 Marine Generator Set Safety Messages
    Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498} Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
    Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225} Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225}
    C175-16 and C175-20 Generator Set Engines Lubrication System Operation
    Air Conditioning and Heating R134a for All Caterpillar Machines Heater Performance - Test
    Air Conditioning and Heating R134a for All Caterpillar Machines Compressor Protection System - Test
    345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0110 - FMI 04
    345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0110 - FMI 09
    C7 PETROLEUM Petroleum Engine Coolant Temperature Sensor - Remove and Install
    345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0190 - FMI 08
    Air Conditioning and Heating R134a for All Caterpillar Machines Troubleshooting Heating and Air Conditioning Control System
    C7 PETROLEUM Petroleum Engine Engine Oil Pressure Sensor - Remove and Install
    345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0248 - FMI 12
    345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0262 - FMI 06
    Air Conditioning and Heating R134a for All Caterpillar Machines In-Line Refrigerant Dryer - Remove and Install
    Service Procedure for Improperly Flashed ECM's{1901, 1920, 7620} Service Procedure for Improperly Flashed ECM's{1901, 1920, 7620}
    345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0291 - FMI 03
    345D, 349D and 349D2 Excavators Hydraulic System Counterweight (Removal and Installation Hydraulic System)
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.