C13, C15, and C18 Tier 4 Final Engines Caterpillar


Engine Oil Filter Base

Usage:

826K 232


图 1g01973513


图 2g02648518

表 1
227-5372 发动机机油滤清器总成的技术规格 
项目  数量  零件  技术规格说明 
4N-8150 弹簧  在试验力下的长度为 55.24 mm (2.175 in)
试验力为 75.619 ± 5.800 N (17.000 ± 1.304 lb)
试验后的自由长度为 93.726 mm (3.6900 in)。 
319-6220 弯头组件  如图所示定位弯头。
拧紧至扭矩为 70 ± 10 N·m (52 ± 7 lb ft)。 
6V-3908 O 形密封圈  用甘油或经认可的等效物润滑孔。 
102-5828 盖  拧紧至扭矩为 70 ± 10 N·m (52 ± 7 lb ft)。 
2P-4304 空心螺柱  在空心螺柱的锥形端涂覆一段长度为 7.6 mm (0.30 in) 的红色 Loctite 271。
拧紧至扭矩为 85 ± 14 N·m (63 ± 10 lb ft)。 
2P-4304 空心螺柱  在空心螺柱的锥形端 10 mm (0.4 in) 的长度 (D) 上涂覆红色 Loctite 271。
拧紧至扭矩为 68 ± 7 N·m (50 ± 5 lb ft)。 

Caterpillar Information System:

C13, C15, and C18 Generator Set Engines Engine Oil Temperature Sensor
C13, C15, and C18 Tier 4 Final Engines Turbocharger
Air Conditioning and Heating R134a for All Caterpillar Machines Cab Pressurization and Filtration System
Air Conditioning and Heating R134a for All Caterpillar Machines Condensate Drainage System
AccuGrade® GPS (CD700) Display Settings
793F and 793F CMD Off-Highway Truck Air System Air Dryer
793F and 793F CMD Off-Highway Truck Air System Pressure Sensor (Air Tank)
AccuGrade® GPS (CD700) Angle Sensor - Calibrate - PSC System
Air Conditioning and Heating R134a for All Caterpillar Machines Machine Preparation for Troubleshooting
C32 Petroleum Engines Plate Locations and Film Locations
345D, 349D and 349D2 Excavators Hydraulic System Fan Motor (Hydraulic Oil Cooler) - Test - Measurement of Case Drain Oil
Air Conditioning and Heating R134a for All Caterpillar Machines Required Tools
345D, 349D and 349D2 Excavators Hydraulic System Cylinder Drift - Check - Loaded Bucket
CX28 On-Highway Transmission Transmission Planetary
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Flywheel
C32 Petroleum Engines Safety Messages
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
C15 and C18 Engines for Caterpillar Built Machines Water Pump
C15-XQ400 Rental Generator Set Wiring Diagrams
C9-XQ300 Rental Generator Set Wiring Diagrams
C7 and C9 On-Highway Engines Turbocharger Air Line Has Oil Present
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
3512, 3508 and 3516 Generator Sets Maintenance Recommendations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.