C9T-TH31 Petroleum Package Caterpillar


Model View Illustrations - C9T-TH31 Petroleum Package

Usage:

TH31-C9T PAY


Illustration 1g01527600
C9T-TH31 right side view
(1) Lifting eyes
(2) Accessory drive housing
(3) Torque converter output speed sensor
(4) Transmission output speed sensor
(5) Wire harness receptacle
(6) Output yoke
(7) No. 5 clutch pressure tap
(8) No. 4 clutch pressure tap
(9) No. 3 clutch pressure tap
(10) No. 2 clutch pressure tap
(11) No. 1 clutch pressure tap
(12) Environmental oil drain
(13) Torque converter inlet pressure tap
(14) Transmission oil supply pressure tap
(15) Bypass valve
(16) Transmission filter pressure tap
(17) Starting motor
(18) Fumes disposal tube
(19) Fuel filter
(20) Fuel priming pump
(21) Engine oil level gauge


Illustration 2g01527609
C9T-TH31 left side view
(1) Lifting eyes
(2) Turbocharger
(3) Oil filler cap
(4) Engine oil filter
(5) Oil drain plug
(6) Oil cooler inlet from torque converter
(7) Oil cooler outlet to torque converter
(8) Fluid sample and diagnostic test port
(9) Oil outlet to oil cooler
(10) Oil inlet from oil cooler
(11) Environmental oil drain
(12) Fluid sample and diagnostic test port
(13) Magnetic plug

Caterpillar Information System:

C9T-TH31 Petroleum Package General Hazard Information
345D, 349D and 349D2 Excavator Machine System Specifications Fuel Tank
C9T-TH31 Petroleum Package Safety Messages
2008/03/24 Improved Studs Are Now Used on Certain Oil/Gas Transmission {3030, 3064, 3160}
C13 On-highway Engine Turbocharger
C4.2 and C6.4 Engines for Caterpillar Built Machines Boost Pressure Sensor
349E Excavator Machine System Specifications Bucket Cylinder
C13T-TH35 and C15T-TH35 Petroleum Packages General Hazard Information
793F Off-Highway Truck Lowering the Body with Engine Stopped
C4.2 and C6.4 Engines for Caterpillar Built Machines Fuel Pressure Sensor
345D, 349D and 349D2 Excavator Machine System Specifications Bucket Cylinder Lines
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0718 - FMI 14
C9T-TH31 Petroleum Package Product Lifting
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Upper Frame
345D, 349D and 349D2 Excavator Machine System Specifications Fuel Lines
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Piston and Rings - Two-Piece Piston
3054B Industrial Engine Balancer - Disassemble
3054B Industrial Engine Balancer - Assemble
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Main Hydraulic Pump
2008/04/07 Improved Studs Are Now Used on Certain Oil/Gas Transmissions {3030, 3064, 3160}
C175-16 and C175-20 Generator Set Engines Engine Misfires, Runs Rough or Is Unstable
793F AC Off-Highway Truck Power Train Bypass Switch (Final Drive Filter)
2008/04/07 Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713}
2008/04/07 Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.