2008/03/17 Caterpillar


A New Starter Solenoid is Now Available {1467}

Usage:

769C 01X
Agricultural Tractor:
  • All
    Articulated Truck:
  • All
    Asphalt Paver:
  • All
    Challenger:
  • All
    Cold Planer:
  • All
    Combine:
  • All
    Earthmoving Compactor:
  • All
    Excavator:
  • All
    Integrated Toolcarrier:
  • All
    Landfill Compactor:
  • All
    Load Haul Dump:
  • All
    Motor Grader:
  • All
    Off-Highway Truck/Tractor:
  • All
    Paving Compactor:
  • All
    Pipelayer:
  • All
    Soil Compactor:
  • All
    Track-Type Loader:
  • All
    Track-Type Skidder:
  • All
    Track-Type Tractor:
  • All
    Wheel Dozer:
  • All
    Wheel Loader:
  • All
    Wheel Skidder:
  • All
    Wheel Tractor-Scraper:
  • All
  • A new starter solenoid is now available. The new 318-2082 Starting Motor Solenoid replaces the former 308-6843 Solenoid Assembly .

    The new 318-2082 Starting Motor Solenoid has improved sealing that can be identified by a black housing.

    Note: The former 308-6843 Solenoid Assembly had a gold housing.

    Caterpillar Information System:

    303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine Systems Swing Drive
    G3520C and G3520E Generator Set Engines Camshaft - Install
    G3520C and G3520E Generator Set Engines Camshaft - Remove
    Bench Test Procedure For A CX28 On-Highway Transmission {3030, 3073} Bench Test Procedure For A CX28 On-Highway Transmission {3030, 3073}
    Software Configuration Guide {3168, 4800, 4808, 7600, 7610, 7620} Software Configuration Guide {3168, 4800, 4808, 7600, 7610, 7620}
    345D, 349D and 349D2 Excavator Machine System Specifications Pilot Valve - Boom Down Relief
    793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Piston Motor (Hydraulic Fan)
    CB-214E, CB-224E and CB-225E Paving Compactors System Pressure Release
    Replacement Procedure for the Service Meter{7478} Replacement Procedure for the Service Meter{7478}
    C175-16 and C175-20 Generator Set Engines System Overview
    345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Boom Cylinder Lines
    345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines - Pump and Motor
    C175-16 and C175-20 Generator Set Engines Starting - Test
    C175-16 and C175-20 Generator Set Engines Sensor Signal (Analog, Active) - Test
    349F and 352F Excavators Machine System Specifications Swing Cushion Valve with Fine Swing Solenoid Valve
    C32 Marine Engine Configuration Parameters
    C32 Marine Engine Diagnostic Flash Code Retrieval
    Procedure to Check the CGI (Clean Gas Induction) Cooler for Internal Leaks{105P} Procedure to Check the CGI (Clean Gas Induction) Cooler for Internal Leaks{105P}
    345C Excavator Machine System Specifications Boom - 7.4 m (24.28 ft)
    345D, 349D and 349D2 Excavator Machine System Specifications Boom Cylinder Lines
    345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Stick - 3.9 m (12.80 ft)
    C175-16 and C175-20 Generator Set Engines Electrical Power Supply - Test
    2008/03/24 New Screws Are Now Used on the Front Housing Cover {1151, 1166, 7553}
    TH55FT-E70 and TH55FT-E90 Transmissions Power Train Electronic Control System Warm-Up Assist Function
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.