854K Wheel Dozer Machine Systems Caterpillar


Rollover Protective Structure (ROPS) - Remove and Install

Usage:

854K 221

拆卸步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     138-7576     连杆支架     3    

开始:

  1. 连接转向机架锁。 请参考拆解和组装, "转向机架锁 - 分离和连接"。



    图 1g01458362

  1. 拆下螺栓 (1) 和垫圈。 拆下盖组件 (2) 。



    图 2g01458365

  1. 断开天线电缆 (4) 。 拆下天线 (3) 。



    图 3g01458366

  1. 将工具 (A) 和适当的起吊设备连接到 ROPS (5) 上。 ROPS (5) 的重量约为 2540 kg (5600 lb)。



    图 4g01458399

  1. 断开线束组件 (6) 。



    图 5g01458458



    图 6g01458463

  1. 拆下盖组件 (7) 和盖组件 (8) 。



    图 7g01458469



    图 8g01458472

  1. 拆下螺栓 (9) 和垫圈。 拆下螺栓 (10) 和垫圈。



    图 9g01458366

  1. 使用工具 (A) 和适当的起吊设备以将 ROPS (5) 从机器上拆下。

安装步骤

表 2
所需工具    
工具     零件号     零件描述     数量    
A     138-7576     连杆支架     3    



    图 10g01458366

  1. 将工具 (A) 和适当的起吊设备连接到 ROPS (5) 上。 ROPS (5) 的重量约为 2540 kg (5600 lb)。 使用工具 (A) 和适当的起吊设备以将 ROPS (5) 安置到机器上。

    注: 确保 ROPS (5) 的安装表面清洁无油漆。




    图 11g01458472



    图 12g01458469

  1. 安装垫圈和螺栓 (10) 。 安装垫圈和螺栓 (9) 。



    图 13g01458463



    图 14g01458458

  1. 安装盖组件 (8) 和盖组件 (7) 。



    图 15g01458399

  1. 安装线束组件 (6) 。



    图 16g01458365

  1. 安装天线 (3) 。 连接天线电缆 (4) 。



    图 17g01458362

  1. 定位盖组件 (2) 。 安装垫圈和螺栓 (1) 。

End By: 断开转向机架锁。 请参考 拆解和组装, "转向机架锁 - 分离和连接"。

Caterpillar Information System:

854K Wheel Dozer Machine Systems Cab and Platform - Remove
2008/05/12 A Corrosion Resistant Air Conditioner Unit is now Available {7320}
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 0428 - FMI 08
993K Wheel Loader Power Train Electrical System Schematic
973D Track-Type Loader Power Train Control Manifold - Assemble - Return
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 0428 - FMI 04
973D Track-Type Loader Power Train Control Manifold - Disassemble - Return
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 0428 - FMI 03
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser) CAN Data Link
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 0427 - FMI 08
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 0427 - FMI 04
992K Wheel Loader Electrohydraulic System Electrohydraulic System
854K Wheel Dozer Machine Systems Cab and Platform - Install
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 0430 - FMI 08
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 0600 - FMI 03
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 0600 - FMI 04
2008/03/24 Improved Exhaust Tube and Pipe Assembly Are Now Used {1061, 7251}
Correct Installation Procedure for the 174-1527 Bearing As and the 8E-5920 Lock Set {3075, 3159} Correct Installation Procedure for the 174-1527 Bearing As and the 8E-5920 Lock Set {3075, 3159}
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 0600 - FMI 08
854K Wheel Dozer Machine Systems Cab - Remove
854K Wheel Dozer Machine Systems Cab - Install
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 0590 - FMI 09
993K Wheel Loader Vital Information Management System (VIMS) MID 049 - CID 0596 - FMI 09
2008/03/03 Procedure For Installing The Service Replacement For The Pilot Accumulator {5077}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.