3500 Engines Caterpillar


Exhaust Manifold

Usage:

3512C ED4


图 1g03836011
前视图

表 1
技术规格 - 282-8422 排气歧管总成 
项目  数量  零件  技术规格说明 
3J-5389 塞  装配前,将船用级防卡剂涂抹到螺纹上。 
拧紧至扭矩为 20 ± 5 N·m (177.0 ± 44.3 lb in)


图 2g03836013
俯视图

表 2
项目  数量  零件  技术规格说明 
32  5P-3345 螺栓  在装配前,向螺纹和轴承表面涂覆船用级防卡剂。 
按照以下步骤拧紧螺栓:

1. 以诊断方式适当拧紧各排气岐管相对的螺栓,以均匀地安置排气密封。
2. 将螺栓拧紧至 55 ± 5 N·m (41 ± 4 lb ft)
44  5p-3875 螺栓  在装配前,向螺纹和轴承表面涂覆船用级防卡剂。 
将螺栓拧紧至 50 ± 5 N·m (37 ± 4 lb ft)
5p-3961 螺栓  在装配前,向螺纹和轴承表面涂覆船用级防卡剂。 
将螺栓拧紧至 50 ± 5 N·m (37 ± 4 lb ft)


图 3g03836014
右视图

表 3
项目  数量  零件  技术规格说明 
5P-3345 螺栓  在装配前,向螺纹和轴承表面涂覆船用级防卡剂。 
拧紧至扭矩为 55 ± 5 N·m (41 ± 4 lb ft)

Caterpillar Information System:

G3520B Engines Gear Group (Front)
G3520B Industrial Engines Ignition Transformer
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127} Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
G3520B Industrial Engines General Information (Electronic Control System)
345D, 349D and 349D2 Excavators Hydraulic System Boom Hydraulic System
C18 Marine Engines Configuration Parameters
3512C and 3516C Industrial Engines Turbocharger
C11 and C13 Engines Turbocharger
C11 and C13 Engines Turbocharger
345D Excavator and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Hydraulic System Relief Valve (Main) - Heavy Lift
2008/03/17 Improved Fastening for the Turbocharger to the Exhaust Manifold {1052, 1053}
307E2 Mini Hydraulic Excavator Machine System Specifications Bucket Linkage
G3520B Industrial Engines Fuel Shutoff - Test
G3520B Industrial Engines Timing Offset - Calibration
3500 Engines Air Inlet and Exhaust Lines
G3500 Engines Engine Oil Pump
3176C, 3406E and 3456 Industrial Engines Speed Control - Test
Reuse and Salvage for C-280 & 3600 Engine Cylinder Blocks {1201} Reuse and Salvage for C-280 & 3600 Engine Cylinder Blocks {1201}
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Seat Belt
793F and 793F XQ Off-Highway Truck Fast Fill Service System Limit Switch (Grease Low Level)
793F and 793F XQ Off-Highway Truck Fast Fill Service System Visual Inspection
2008/09/01 An Improved Front Mounted Open Crankcase Ventilation System Is Now Used {1074, 1317}
Instructions for the Field Installation of a Secondary Crankcase Breather Kit on the C15 On-highway Engines{1317, 1317} Instructions for the Field Installation of a Secondary Crankcase Breather Kit on the C15 On-highway Engines{1317, 1317}
2008/03/01 A New Purge Pump and Service Pack are Now Used {107P}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.