Final Drive and Wheel from Service Brake - Separate
分离步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 138-7576     | 连杆支架     | 3     |
B     | 2H-1628     | 螺栓     | 4     |
开始:
- 拆卸终传动、制动器和车轮。 请参阅拆解和组装, "终传动、制动器和车轮 - 拆卸和安装"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将工具 (A) 和适当的起吊设备连接到终传动、车轮和行车制动器 (1) 上,如图所示。 将终传动、车轮和行车制动器 (1) 安置到适当的垛架上,如图所示。 此时不要拆卸工具 (A) 和适当的起吊设备。
Show/hide table
图 1 | g01447125 |
- 拆下螺栓 (2) 。
- 将终传动和车轮 (3) 作为一个单元从行车制动器 (4) 上拆下。 终传动和车轮 (3) 的组合重量约为 1565 kg (3450 lb)。
注: 行车制动器 (4) 的重量大约为 250 kg (550 lb)。
注: 可能需要在安装螺栓 (1) 的四个孔内安装工具 (B) ,以将终传动和车轮 (3) 从行车制动器 (4) 分离。
Show/hide table
图 2 | g01447128 |
- 从行车制动器 (4) 上拆下 O 形密封圈 (5) 。
注: 不要拆卸定位销 (6) ,除非定位销 (6) 损坏或折断。
Show/hide table
图 3 | g01447130 |
Caterpillar Information System:
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0621 - FMI 04
992K Wheel Loader Electrohydraulic System Pressure Tap Locations
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Cleaner Bar Tips - Replace - If Equipped
992K Wheel Loader and 854K Wheel Dozer Power Train Final Drive, Brake and Wheel - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0621 - FMI 03
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Cleaner Bar - Check/Adjust - If Equipped
990H Wheel Loader Warning Light for the Autolube{7540} 990H Wheel Loader Warning Light for the Autolube{7540}
994H Wheel Loader Machine Systems STIC Control and Pilot Valve (Steering) - Install
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0596 - FMI 14
2008/06/23 Improved Mounting Caps for the Idlers and Rollers are now Used {4159, 4180}
IT38H Integrated Toolcarrier and 938H Wheel Loader Lift Kickout
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0596 - FMI 09
992K Wheel Loader and 854K Wheel Dozer Power Train Final Drive and Wheel to Service Brake - Connect
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0622 - FMI 03
992K Wheel Loader and 854K Wheel Dozer Power Train Service Brake - Disassemble
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0622 - FMI 04
The Boom and Bearing Group May Crack on the 988H Wheel Loaders{6501} The Boom and Bearing Group May Crack on the 988H Wheel Loaders{6501}
992K Wheel Loader and 854K Wheel Dozer Power Train Service Brake - Assemble
2008/04/21 A Procedure is Available to Repair the Upper Hitch Assembly {7054, 7057, 7100}
2008/02/04 The New Welding Procedure for The Rear Trunnion Support Area of The Rear Frame {7051}
992K Wheel Loader and 854K Wheel Dozer Power Train Final Drive and Wheel - Disassemble
2008/02/04 A Secondary Pin Retention System Is Now Used on Wheel Loaders {6107, 6501}
993K Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Lift Cylinder Head End Port) - Test and Adjust
993K Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Lift Cylinder Rod End Port) - Test and Adjust