992K Wheel Loader and 854K Wheel Dozer Power Train Caterpillar


Parking Brake - Install

Usage:

854K 221

安装步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     1U-9200     操纵杆滚轮起重机     1    
B     138-7575     连杆支架     1    
C     6V-6640     密封胶     1    

  1. 彻底清洁停车制动器和输出分动器壳体的配合表面上的密封胶。

  1. 将工具 (C) 涂敷在停车制动器和输出分动器壳体的配合表面上。



    图 1g00350074



    图 2g00350075

  1. 将工具 (A) 、工具 (B) 和适当的起吊设备固定到制动器 (2) 上。 采用工具 (A) 、工具 (B) 和适当的起吊设备以将停车制动器 (2) 提升到位。 停车制动器 (2) 的重量大约为 159 kg (350 lb)。 接合停车制动器 (2) 轴上的花键以及输出分动器壳体的花键。

  1. 安装螺栓 (7) 以将停车制动器 (2) 固定到输出分动器壳体上。 拧紧螺栓 (7) 至扭矩为 270 ± 40 N·m (200 ± 30 lb ft)。

  1. 拆卸工具 (A) 、工具 (B) 和适当的起吊设备。 将螺栓 (5) 上紧到 270 ± 40 N·m (200 ± 30 lb ft) 的扭矩。



    图 3g00350076

  1. 从板 (4) 拆下螺栓 (3) 。



    图 4g01443804

  1. 将螺栓 (3) 安装到板 (4) 中的原始位置。



    图 5g00350078

  1. 将软管组件 (1) 连接到停车制动器 (2) 。

  1. 分离转向机架锁。 请参考拆解和组装, "转向机架锁 - 分离和连接"。

Caterpillar Information System:

992K Wheel Loader and 854K Wheel Dozer Power Train Parking Brake - Assemble
992K Wheel Loader and 854K Wheel Dozer Power Train Parking Brake - Disassemble
992K Wheel Loader and 854K Wheel Dozer Power Train Parking Brake - Remove
992K Wheel Loader Electrohydraulic System Ride Control System
Operation Manual for the Custom Hand Metering Unit (HMU) Steering Wheel and Transmission Control for the 988H Wheel Loader{3065, 4309, 4310, 4338, 4343} Operation Manual for the Custom Hand Metering Unit (HMU) Steering Wheel and Transmission Control for the 988H Wheel Loader{3065, 4309, 4310, 4338, 4343}
2007/12/24 Oil Suction Tube {1302}
992K Wheel Loader Electrohydraulic System Relief Valve (Line) - Dual Set Head End
988G Wheel Loader Electrohydraulic System Relief Valve (Line) - Rod End
988G Wheel Loader Electrohydraulic System Relief Valve (Line) - Head End
3500B Locomotive Engines Belt Tension Chart
AD55B Underground Articulated Truck Machine Systems Firewall - Install
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0669 - FMI 08
994F Wheel Loader Additional Messages
993K Wheel Loader Engine Supplement Hood - Remove
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0673 - FMI 08
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0679 - FMI 05
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0679 - FMI 06
993K Wheel Loader Electrohydraulic System Ride Control Accumulator - Test and Charge
2008/09/08 A New Main Steering Control Valve Is Now Used on Large Wheel Loaders and Large Wheel Dozers with the Standard and Secondary Steering {4307, 4307}
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0679 - FMI 13
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0678 - FMI 05
992K Wheel Loader and 854K Wheel Dozer Steering System Steering Pilot System
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0678 - FMI 06
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0678 - FMI 13
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.