3500B Locomotive Engines Caterpillar


Belt Tension Chart

Usage:

3512B 3ZW

表 1
技术规格 - 197-9087 皮带张紧度表 
皮带尺寸  皮带宽度  仪表读数  量规(力)  皮带张紧度(频率)
“初始”(1) 
皮带张紧度(频率)
“已使用的”(2)(3) 
量规(频率)  
皮带张紧度(力)
“初始”
(1)
皮带张紧度(力)
“已使用的”
(2)(3)
基本标号  标号 
8 - 肋
聚乙烯 - 肋 
27.82 mm (1.095 inch)  800 ± 22 N (180 ± 5 lb)  489 ± 44 N (110 ± 10 lb)  BT-33-109  98 ± 10 HZ  76 ± 8 HZ  Clavis 14 型 
具有弹簧加载的张紧器的皮带不能使用皮带张紧度表。 
测量离发动机最远的那根皮带的张紧度。 
(1) 皮带张紧度的“初始值”适用于新的皮带。
(2) “已使用的” 皮带张紧度针对的是已在额定转速使用了 30 分钟或更长时间的皮带。
(3) 如果皮带的张紧度降落到低于“已使用的”皮带的皮带张紧度,应将皮带再次绷紧到“已使用的” 皮带的张紧度范围的高侧值。

Caterpillar Information System:

3516C Generator Set Engine Speed/Timing - Test
C7 and C9 On-Highway Engines Solenoid Valve - Test
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Injector Solenoid - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Alarm Modules
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module CAN Data Link - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Programmable Kilowatt Level Output
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Programmable Spare Output
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Programmable Spare Relay Outputs
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Diagnostic Codes
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) SP Fault Codes
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) AL Fault Codes
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Fault Description
2007/12/24 Oil Suction Tube {1302}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Alarm Module Control (Custom)
2008/04/21 A New Wire Assembly is Used to Ground the Enclosure for the ECM {1901, 7556}
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Cat Data Link - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Customer Interface Module
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) System Communication Module (Customer)
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) EMCP Electronic Control (AC Transformer Box) - Replace
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) EMCP Electronic Control (Bus Transformer Box) - Replace
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Relay Module - Replace
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) EMCP Electronic Control (Generator Set) - Replace
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Schematics and Wiring Diagrams
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Symbols
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.