AP600D and BG600D Asphalt Pavers Caterpillar


Specifications

Usage:

BG600D B6K

Intended Use

An Asphalt Paver is a machine that is used for road construction. The Asphalt Paver typically uses bulk material for the placement of paved surfaces. Most commonly, hot mix asphalt is supplied by vehicle delivery to the paver's front hopper.

The AP600D Asphalt Paver is a heavy duty paver that can place paving surfaces for many applications. The Asphalt paver can be used for numerous applications such as roads, city streets, parking lots, highways, and motorways. The Asphalt Paver accepts delivery of asphalt mix from a truck or transport vehicle at the front. The asphalt paver then contains the mix in a hopper. Slat conveyors transport the mix from the hopper to the rear of the machine. The mix flows onto the ground ahead of the screed. The screed shapes the mix to specified dimensions. The screed also levels the mix to specified dimensions. The slope and the grade of the asphalt surface is precisely controlled by sensors and references that are mounted on the paver. This system achieves a high degree of flatness. The paver can be configured with different types of screeds to satisfy common customer's requirements.

Dimensions

Table 1
AP600D Asphalt Paver 
Approximate Weight(1)  13731 kg (30270 lb) 
Length (Maximum)  5.4 m (17 ft 10 inch) 
Width  3.3 m (10 ft 10 inch) 
Width with hoppers in the UP position  2.5 m (8 ft 2 inch) 
Height  3.8 m (12 ft 7 inch) 
(1) Specifications do not include the machine's screed. Make sure that you know the specifications of the screed that is attached to the machine.

Table 2
AP600D Asphalt Paver equipped with an AS3251C Asphalt Screed 
Approximate Weight  17300 kg (38060 lb) 
Length (Maximum)  6.6 m (21 ft 7 inch) 
Width  2.7 m (8 ft 11 inch) 

Table 3
AP600D Asphalt Paver equipped with an AS2252C Asphalt Screed 
Approximate Weight  16800 kg (37000 lb) 
Length (Maximum)  6.6 m (21 ft 7 inch) 
Width  2.7 m (8 ft 11 inch) 

Slope Table



Illustration 1g00821334
All figures in feet are measured horizontally.
All figures in inches are measured vertically and the figures are accurate within 1/32 inch.

Caterpillar Information System:

259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Track Tensioner
2008/02/25 A New Plug and O-ring Are Now Used on the Cylinder Head {1100}
2008/02/25 A New Plug Assembly Is Used on the Cylinder Head of Certain Machines Engines {1100}
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Sprocket
AP655D and BG655D Asphalt Pavers Sound Information and Vibration Information
2007/12/17 An Improved Fitting Assembly Is Available for Certain Backhoe Loaders to Improve Serviceability {6506}
R1700G Load Haul Dump Fire Extinguisher Location
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Track Drive - Right Hand
450E Backhoe Loader MID 039 - CID 0168 - FMI 04
450E Backhoe Loader MID 039 - CID 0168 - FMI 03
2008/03/03 New Seals in the Main Hydraulic Pump Prevent Oil Leaks from the Pump Shaft {5070, 7555}
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Track Drive - Left Hand
R1700G Load Haul Dump Machine Electrical System Battery Isolation Control
AP600D and BG600D Asphalt Pavers Daily Inspection
R2900G (JLK) Load Haul Dump Retrofitting The Battery Isolation Control{1402, 1408, 1411} R2900G (JLK) Load Haul Dump Retrofitting The Battery Isolation Control{1402, 1408, 1411}
2007/12/17 Correction to Operation and Maintenance Manual , "Additional Messages" {7000}
2007/12/17 Correction to Operation and Maintenance Manual , "Indicators" {7400, 7450}
2007/12/17 Correction to Operation and Maintenance Manual , "Fuel Shutoff Valve" {1329}
2007/12/17 Correction to Operation and Maintenance Manual , "Steering Frame Lock" {7506}
2007/12/31 New Oil Suction Tube {1302}
2007/12/24 Combustion Inserts in the Cylinder Head {1100}
24M Motor Grader Machine Systems Battery - Remove and Install
450E Backhoe Loader MID 039 - CID 0247 - FMI 09
AP600D and BG600D Asphalt Pavers Operator Controls - Main Control Panel
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.