Engine Speed/Timing Sensor
Show/hide table
| |
| 图 1 | g02587517 |
Show/hide table
| 技术规格 - 273-5041 发动机转速 / 正时传感器总成 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | - | - | 拧紧至扭矩为 |
| 工作电压为 7.5 至 14 VDC。 | |||
| 输出频率为 9 Hz 至 10 kHz。 | |||
Caterpillar Information System:
2008/03/01 A New Turbocharger is Now Used on Certain On-Highway Engines {1052, 1053}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Engine Does Not Shutdown
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Indicator for Low Oil Pressure
3516C Generator Set Engine Event Codes
3516C Generator Set Engine Diagnostic Trouble Codes
345D, 349D and 349D2 Excavator Machine System Specifications Check Valve (Boom Drift Reduction)
345C Excavator Machine System Specifications Boom Lines
3500 Industrial Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
3500 Engines with EUI Option Engine Coolant Temperature Sensor
G3600 Engines Cylinder Firing Signal - Test
G3600 Engines Control Module - Replace - ICSM
C175-16 and C175-20 Generator Set Engines Intake Manifold Air Pressure Is High
C15 Petroleum Generator Set Engines Turbocharger
3508B Engine for Caterpillar Built Machines Crankcase Breather
G3500 Generator Sets Engine Oil Filter - Change
C175-16 Locomotive Engine Electric Starting Motor
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Sensor Signal (Analog, Passive) - Test
2007/12/01 A New Internal Wiring Harness for the Injectors is Now Used {1120, 1408}
G3612 and G3616 Engines Prechamber Ignition Body - Install
G3600 Engines Speed Control (Switch) - Test
2008/02/25 A New Plug and O-ring Are Now Used on the Cylinder Head {1100}
2008/02/01 A New Plug and O-ring Are Now Used on the Cylinder Head {1100}
3500 Engines Air Inlet and Exhaust Lines
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0269 - FMI 03