An Improved Start/Stop Control is Now Used on Marine Applications {7418}
- Marine Engine:
- 3406E MARINE (S/N: 9WR2266-UP)
- Generator Set:
- C18 MARINE GS (S/N: CYN150-UP)
- 3412E MARINE (S/N: 9KS1377-UP; 9PW485-UP)
- C15 MARINE (S/N: RLA100-UP)
- C18 MARINE (S/N: CKH110-UP; C1J180-UP; NAX1-UP; NAY1-UP)
- C30 MARINE (S/N: CLX130-UP)
- C32 MARINE (S/N: RXB180-UP; RNC2180-UP)
Description of Change: An improved start/stop control is now used. The new start/stop control decreases the possibility of voltage spikes.
Adaptable To: A diode has been incorporated into the wiring harness for the start/stop control. Refer to Table 1 for the proper replacement part number. The new start/stop controls are direct replacements for the old start/stop controls.
Show/hide table
Old Start/Stop Control     | New Start/Stop Control     |
131-8285 Start/Stop Control     | 304-6650 Auto Start/Stop Control     |
203-4623 Auto Start/Stop Control     | 304-6645 Auto Start/Stop Control     |
203-4624 Auto Start/Stop Control     | 304-6646 Auto Start/Stop Control     |
Show/hide table
Effectivity for the New Start/Stop Controls     |
S/N:9KS4505-UP     |
S/N:9PW3105-UP     |
S/N:9WR10526-UP     |
S/N:C1J1088-UP     |
S/N:CKH3071-UP     |
S/N:CYN670-UP     |
S/N:CLX2938-UP     |
S/N:NAX30-UP     |
S/N:NAY92-UP     |
S/N:RLA910-UP     |
S/N:RNC3073-UP     |
S/N:RXB3751-UP     |
Caterpillar Information System:
2007/12/10 Installation of Fuel Injection Pump {1251}
3500 Engines Turbocharger
3500 Engines Exhaust Manifold
TH55-E70 and TH55-E90 Petroleum Transmissions Gear Pump (Torque Converter and Transmission) - Assemble
TH55-E70 and TH55-E90 Petroleum Transmissions Gear Pump (Torque Converter and Transmission) - Disassemble
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Indicator for High Water Temperature
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Indicator for Emergency Stop
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Troubleshooting Dedicated Shutdown Indicators
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) SP Fault Code
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) AL Fault Code
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Sensor Supply - Test
G3600 Engines Cylinder Combustion - Test
C175-16 and C175-20 Generator Set Engines Intake Manifold Air Pressure Is High
G3600 Engines Control Module - Replace - ICSM
G3600 Engines Cylinder Firing Signal - Test
3500 Engines with EUI Option Engine Coolant Temperature Sensor
3500 Industrial Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
345C Excavator Machine System Specifications Boom Lines
345D, 349D and 349D2 Excavator Machine System Specifications Check Valve (Boom Drift Reduction)
3516C Generator Set Engine Diagnostic Trouble Codes
3516C Generator Set Engine Event Codes
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Indicator for Low Oil Pressure
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Engine Does Not Shutdown
2008/03/01 A New Turbocharger is Now Used on Certain On-Highway Engines {1052, 1053}