Installation of Fuel Injection Pump {1251}
- Engine:
- 3056 (S/N: 7MS1534-UP)
- Industrial Engine:
- 3056E (S/N: 3561-UP)
There have been issues when the fuel injection pump has been replaced. The torque of the studs and nuts have not been tightened to the correct torque. This has caused the fuel injection pump to move. The movement of the fuel injection pump affects the performance of the engine.
The Disassembly and Assembly manual has been updated with a new procedure.
The studs that secure the fuel injection pump to the front housing must be tightened to the correct torque. Refer to Disassembly and Assembly, "Housing (Front) - Install" for the correct procedure.
To install the fuel injection pump refer to Disassembly and Assembly, "Fuel Injection Pump - Install" for the correct procedure.
Caterpillar Information System:
3500 Engines Turbocharger
3500 Engines Exhaust Manifold
TH55-E70 and TH55-E90 Petroleum Transmissions Gear Pump (Torque Converter and Transmission) - Assemble
TH55-E70 and TH55-E90 Petroleum Transmissions Gear Pump (Torque Converter and Transmission) - Disassemble
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Indicator for High Water Temperature
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Indicator for Emergency Stop
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Troubleshooting Dedicated Shutdown Indicators
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) SP Fault Code
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) AL Fault Code
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Sensor Supply - Test
G3600 Engines Cylinder Combustion - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1170 - FMI 08
2007/12/17 An Improved Start/Stop Control is Now Used on Marine Applications {7418}
C175-16 and C175-20 Generator Set Engines Intake Manifold Air Pressure Is High
G3600 Engines Control Module - Replace - ICSM
G3600 Engines Cylinder Firing Signal - Test
3500 Engines with EUI Option Engine Coolant Temperature Sensor
3500 Industrial Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
345C Excavator Machine System Specifications Boom Lines
345D, 349D and 349D2 Excavator Machine System Specifications Check Valve (Boom Drift Reduction)
3516C Generator Set Engine Diagnostic Trouble Codes
3516C Generator Set Engine Event Codes
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Indicator for Low Oil Pressure
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Engine Does Not Shutdown