An Improved Three-Piece Oil Pan Gasket is Now Used {1302, 7555}
- Gas Engine:
- G3406 SI TA (S/N: 4FD1-UP)
- Generator Set Engine:
- 3406C (S/N: 2AM1-UP)
- Generator Set:
- G3406 SI (S/N: KAR1-UP; R7E1-UP)
- Industrial Engine:
- 3406 IND DI PC T (S/N: 90U1-UP)
- Marine Engine:
- 3406 MARINE DI PC T (S/N: 91U1-UP)
- Petroleum Engine:
- C-15 PETROLEUM (S/N: Z2C1-UP)
- G3406 SI (S/N: 1RK1-UP)
- 3406C GEN SET (S/N: C2G1-UP; C5G1-UP; C8G1-UP; KPS1-UP; 1LS1-UP; 8FS1-UP; 9ES1-UP; LRX1-UP)
- 3406C MARINE GS DI TA (S/N: PFH1-UP)
- C18 MARINE GS (S/N: CYN1-UP; MGS1-UP)
- 3406E IND (S/N: 6BR1-UP)
- 3456 IND (S/N: 3LW1-UP)
- C-16 IND (S/N: BFM1-UP)
- C15 IND (S/N: JRE1-UP)
- C18 (S/N: WJH1-UP)
- 3406C MARINE (S/N: 1SS1-UP)
- 3406E MARINE (S/N: 9WR1-UP)
- C15 MARINE (S/N: RLA1-UP)
- C18 MARINE (S/N: CKH1-UP; C1J1-UP; NAX1-UP; NAY1-UP)
- C18 MARINE ENG (S/N: J2K1-UP)
Description of Change: A new three-piece oil pan gasket is now used. The improved oil pan gasket now has a screen bead. This will decrease the chance of an engine oil leak. The old gaskets have also been improved with the screen bead.
Adaptable To: The new 188-0210 Gasket is now used in production. The old 4N-7266 Oil Pan Gasket and the old 7W-0845 Gasket has the screen bead as well. If your engine has the old 4N-7266 Oil Pan Gasket and the old 7W-0845 Gasket then replace the current gasket with the same part number. The 188-0210 Gasket is the gasket that is being placed on engines during assembly.
Caterpillar Information System:
C175-16 Engine for 795F Series AC Off-Highway Trucks Connecting Rod - Type 1
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1168 - FMI 04
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1168 - FMI 03
2008/01/21 A New Lubricator for the Air Starting Motor is Now Used {1451}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1167 - FMI 04
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1038 - FMI 04
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1038 - FMI 03
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0858 - FMI 03
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
G3600 Engines Choke Actuator - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0566 - FMI 07
C175-16 Locomotive Engine Piston and Rings
2008/01/01 An Improved Three-Piece Oil Pan Gasket is Now Used {1302, 7555}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1169 - FMI 02
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1170 - FMI 02
3516C Generator Set Engine Air Shutoff - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1170 - FMI 04
2007/12/24 An Improved Method of Mounting the Air Compressor Is Now Used {1803}
TH55-E70 and TH55-E90 Petroleum Transmissions Gear Pump (Torque Converter and Transmission) - Remove
TH55-E70 and TH55-E90 Petroleum Transmissions Gear Pump (Torque Converter and Transmission) - Install
C7 and C9 On-highway Engines Monitoring System - Additional Information for Caterpillar Model Year 2008 On-highway Engines Regulated by the California Air Resources Board
C13T-TH35 and C15T-TH35 Petroleum Packages Monitoring System - Additional Information for Caterpillar Model Year 2008 On-highway Engines Regulated by the California Air Resources Board
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1170 - FMI 08
G3600 Engines Cylinder Combustion - Test