2008/01/21 Caterpillar


A New Lubricator for the Air Starting Motor is Now Used {1451}

Usage:

3412E 9KS
Marine Engine:
3412E MARINE (S/N: 9KS1-UP; 9PW1-UP)
C12 MARINE (S/N: C1Z1-UP)
C32 MARINE (S/N: RXB1-UP)

Description of Change: A new lubricator is now used. The screen for debris on the new lubricator has been removed from the air inlet side. The new lubricator reduces the chance of the plunger from becoming stuck in the open position. This prevents too much fuel from entering into the starter from the lubricator.

Adaptable To: Replace the old 172-0208 Air Motor Lubricator Gp with the new 317-1556 Air Motor Lubricator Gp. The new 317-1556 Air Motor Lubricator Gp is a direct replacement for the 172-0208 Air Motor Lubricator Gp.

Caterpillar Information System:

Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1167 - FMI 04
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1038 - FMI 04
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1038 - FMI 03
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0858 - FMI 03
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
G3600 Engines Choke Actuator - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0566 - FMI 07
C175-16 Locomotive Engine Piston and Rings
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0447 - FMI 12
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0441 - FMI 12
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Configuration Parameters
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0445 - FMI 12
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1168 - FMI 03
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1168 - FMI 04
C175-16 Engine for 795F Series AC Off-Highway Trucks Connecting Rod - Type 1
2008/01/07 An Improved Three-Piece Oil Pan Gasket is Now Used {1302, 7555}
2008/01/01 An Improved Three-Piece Oil Pan Gasket is Now Used {1302, 7555}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1169 - FMI 02
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1170 - FMI 02
3516C Generator Set Engine Air Shutoff - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1170 - FMI 04
2007/12/24 An Improved Method of Mounting the Air Compressor Is Now Used {1803}
TH55-E70 and TH55-E90 Petroleum Transmissions Gear Pump (Torque Converter and Transmission) - Remove
TH55-E70 and TH55-E90 Petroleum Transmissions Gear Pump (Torque Converter and Transmission) - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.