2007/12/24 Caterpillar

Industrial Engine:

3054C (S/N: 3341-UP)

3406 IND DI T (S/N: 90U1-UP)

3406B IND DI (S/N: 6TB1-UP)

3406C IND (S/N: 3ER1-UP)

3406E IND (S/N: 6BR1-UP)

3408 (S/N: 67U1-UP)

3408B DI (S/N: 9TD1-UP)

3408E (S/N: 7PR1-UP)

3412 (S/N: 38S1-UP)

3412C (S/N: 8AR1-UP)

3412E (S/N: 4CR1-UP; BFT1-UP)

3412E IND (S/N: BDT1-UP)

C-15 IND (S/N: BEM1-UP)

C-16 IND (S/N: BFM1-UP)

C15 IND (S/N: JAS1-UP; JRE1-UP)

C18 (S/N: EJG1-UP; WJH1-UP)

C27 INDUSTRIAL (S/N: TWM1-UP)

G3616 (S/N: 4CG1-UP)

Marine Engine:

3304B (S/N: 1PS1-UP)

3306B (S/N: 1RS1-UP)

3408C MARINE (S/N: 9ER1-UP)

3516B (S/N: 3CW1-UP)

C18 MARINE (S/N: WKB1-UP; C1J1-UP)

Petroleum Engine:

C15 PETROLEUM (S/N: JDK1-UP)

C18 PETROLEUM (S/N: MPE1-UP; WJW1-UP)

The 10R-2356 Flywheel As is machined to different thicknesses in order to be installed in various engines. Some of the engines will require shorter mounting bolts than other engines. If the mounting bolts for the 10R-2356 Flywheel As are too long the bolts will bottom out and the bolts will not hold the 10R-2356 Flywheel As securely.

Use the 5B-0841 Bolts when the thickness of the 10R-2356 Flywheel As measures 16.4 mm (0.64 inch). If the 10R-2356 Flywheel As is machined from the part numbers in Table 1 then the thickness is 16.4 mm (0.64 inches).

Note: Measure the thickness of the 10R-2356 Flywheel As at the circle for the bolt.

Use the 0S-1576 Bolts when the thickness of the 10R-2356 Flywheel As measures 22.81 mm (0.90 inch).

Note: Measure the thickness of the 10R-2356 Flywheel As at the circle for the bolt.